Question about Microsoft Likom HD19A 19" LCD Monitor
I replaced that fuse over 3 years ago with a slightly larger current fuse. I soldered an inline fuse holder to the ckt. board. Also, after going thru two monitor power supplies, I modified an old computer power supply and used it to power the monitor. I have had no more problems with blown fuses and power supplies. It appears that when monitor is first powered up, there is a current surge which blows fuses and powers supplies. I really like this monitor as the display is almost as tall as wide so none of that wide screen distortion. I would like to purchase another non working hd19a - ron
Posted on Jul 04, 2012
Where is this glass fuse? I have the monitor and board open but see no small glass fuse. if you have a photo or draw a picture that would be great. or give a detail mention of its exact location on the board. again thanks so much.
Posted on Nov 27, 2009
I had the same problem -- no power, wouldn't respond to the power button. Problem was with a fuse on the controller board. Disassembly was pretty straightforward; the fuse is a little glass tube on the board (it's pretty obvious).
I ended up replacing the fuse with a piece of wire and the monitor now works fine. I haven't been able to find what the replacement part for the fuse is -- if anyone has this information I'd certainly like to know it.
Posted on Oct 01, 2009
Posted on Dec 27, 2007
Tips for a great answer:
Jul 22, 2011 | Likom HD15A 15" LCD Monitor
Jun 04, 2009 | Microsoft Likom HD19A 19" LCD Monitor
Dec 11, 2008 | Microsoft Likom HD19A 19" LCD Monitor
One of 2 possibilities come to mind.
1, The vga chord is loose on the back of the monitor.
2, Your resolution is set too high or low to be displayed.
The blinking light means that the monitor is either not getting or understanding a signal.
Hope this helps.
Oct 12, 2007 | Microsoft Likom HD19A 19" LCD Monitor
May 15, 2007 | Likom HD15A 15" LCD Monitor
Jun 29, 2006 | Microsoft Likom HD19A 19" LCD Monitor
580 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: