My problem is intermittent. sometimes when i turn it on..the green light will flash and then turn red. i have to keep turning on the tv until something "catches". sometimes i give up and wont turn on the tv...but most times i can turn it on after 10 mins of trying. really annoying problem. my tv habbits are not excessive as i dont have cable and only watch dvd's maybe twice a week.
I have got the exactly same problem as you have, i just pull the plag and wait couple of days.. then turn it on again. it just open like a normal.. but when you finished with tv and turn it off... it occure the same problem again..
think we need service.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove batteries from room stat,turn off the electrical supply to reciever unit.
Turn back on the electric to reciever unit,the red light should be
on,press the top "manual" button,the green light should come on and
boiler should fire (assuming the programmer is in an "on" period)
Press the bottom button,and keep it pressed,then press the top button
until the green light flashes,stand about 6 feet away,and refit the
batteries to the stat while observing the reciever unit,either the red
or green light (cant remember which) should flash to show the 2 units
Another basic test if all seems ok,when turning the stat up or down,when
the green light on the reciever unit comes on or goes off,its usually
accompanied by an audible "click" ive found,that if this is not
happening, the reciever unit does not switch either on or off,may be
Replacement is the only cure. garden led light
If your set was manufactured around July 2005, you may need a firmware upgrade to solve this issue. On the Sony website you can enter your model # and serial # to see if you TV is affected. If so, it is easy to have done and may be free from Sony. It sounds like the issue they described in the writeup on the required formware update. I had mine done within few months of when i bought it (purchased in Dec 2005) and it has been working flawlessly since.
If you turn off the printer and turn it back on, do you get any noises, ie motor noises, or does it instantly go to all lights flashing? If you get no noises this usually indicates a board fault and you should look for a new printer.