Hold Down the 0 Button Until It Appears
You have to press and hold the "0" key until it changes to a + sign.
There is actually a + sign in the right hand corner of the '0' button. Try turning off the phone then dialing regularly and try to press and hold it again. I have a v3 in front of me and it is producing the + sign. Do all the buttons your keypad work??
Who is your cell phone carrier? I have T-Mobile but if you have a v3 the keypad is the same on all the v3's.
You may have to change the unit if your device isnt doing that. Take a look at this:
Entering text or inserting pauses and waits on the Motorola RAZR V3 (Cricket/Alltel/T-Mobile/AT&T).
Goal:
Entering text or inserting pauses and waits on the Motorola RAZR V3.
Entering special characters
Changing from letters to numbers
Changing letter case
Fact:
Motorola RAZR V3
Fix:
Motorola RAZR V3 Keypad Layout
General Text Functions:Press the number 1 key for different symbols.
To enter a space press the * key.
To toggle between upper and lowercase press the 0 key.
To toggle between text entry modes press the # key.
To enter a number press and hold that key.
To toggle between Tap and iTap modes, press the # key.
To enter a + while dialing, hold down the 0 key.
Icons/Modes:Tap and Tap Extended mode:
indicates next character will be capitalized
indicates all characters will be capitalized
indicates all characters will be in lower case
iTap (T9) mode:
indicates next character will be capitalized
indicates all characters will be capitalized
indicates all characters will be in lower case
Numeric mode:
indicates all characters will be numeric
Symbol mode:
indicated all characters will be symbols
Using Tap or Tap Extended mode: Press a number key (1 - 9) repeatedly until the desired character appears. NOTE: There are more characters available for a number key than are printed on the key.
Using iTap mode: Write the desired word by pressing the keys 2 - 9. Press each key only once for one letter. The word changes after every key press.
Do not pay attention to what appears on the display. The word match is evolving. Wait until you have keyed in the whole word before checking the result.
When finished entering the word, check that it is correct. If the word is correct, confirm it by pressing right on the direction pad or by pressing the * key to insert a space. When the highlighting disappears the next word can be entered.
Inserting pauses and waits:Pauses: After a number is dialed, any numbers following the pause will be automatically entered after 2 seconds.
Waits: After a number is dialed, any numbers following the wait will be automatically entered once the user presses the send key.
While entering a number, press and hold the star (*) key until a letter "p" or "w" appears.
Device keypad layout of the Motorola RAZR V3
Goal:
Device keypad layout of the Motorola RAZR V3
Fact:
Motorola RAZR V3
Fix:
×
127 views
Usually answered in minutes!
my phone key pad is not working
i tried it several times already but it didn't work.that was the first thing that i did,i press "0" key and hold it for more than a minute but still no + sign appeared
there is no + sign beside the o....all the keypads are funtioning...just purchased the unit 4 days ago....
cricket..do you think we need to change the unit?there's no + sign beside the 0 key
×