WHY IS MY CAMERA NOT STAYING ON ?

If Try one or more of the following

Ready light does not turn on and the camera does not work.

• Turn on the camera (Turning on the camera).

• Install new batteries (Loading the battery) or charge rechargeable batteries.

• Turn camera off, then back on.

Ready light blinks green.

• Camera is operating normally.

Ready light blinks amber.

• Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

• Install new batteries (Loading the battery) or charge rechargeable batteries.

Ready light glows steady red.

• Transfer pictures to the computer (Transferring pictures with the USB cable), delete pictures from the camera (Deleting pictures/videos), switch image storage locations (), or insert a card with available memory (Using an optional SD/SDHC or MMC card).

• Wait. Resume picture taking when the light turns green.

• Change the image storage location to internal memory (), or use a different card.

Ready light is off or glows steady green.

• Camera is operating normally

I believe it does that when there is insufficient light to take the picture, but if it's doing it everywhere then your light sensor in the camera may be malfunctioning. Try pointing the camera at something and then hold the button down light your taking a picture for 15 sec. - Some cameras this overrides the light sensor.

You console is fried, it has over heated. send it in

problem with the main board inside of the DS Lite. Its not staying on with the voltage being provided. To verify this. Plug your DS Lite into a working outlet and see if it stays on.

If it doesn't stay on then take the battery out and only hook up the ac adapter to it and see if it stays on.

At that point if it doesn't stay on, try to use another AC Adapter to see if it stays on, if it doesn't then you know for sure the main board is bad and you would need to get a new ds lite.

KODAK Easyhare digital camera light status
1. Blinking green light(or blinking blue or white light in some models) - Means camera is performing a power up procedure. Note: Wait a few moments to see if the camera displays a solid green (or blue or white) light or a blinking red light.
2. Solid green light(or blinking blue or white light in some models) - Means Camera has sufficient power
3. Blinking red light - Means camera batteries are weak or need replacement; If battery are new and still red light camera needed to be repaired

For futher assistance contact Kodak support line 1 800 235 6325 (23KODAK)

Red light indicates that the camera is out of charged., Try to charged your battery for 3-4 hrs if you encounter flashing red on a fully charged battery you need to call kodak 1 800 235 6325 ext 12

You can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer

have you cheked the kabels and stuf

Try cleaning the contacts on the memory card with a pencil eraser.

i try to turn the camera...but it seems that hangup,,,,the lights green it blinks blinks,,,,and theres a circle on scren.....i have lotsof pic there that is very important for school...was it gone?waht can i do so that my pic wont lost?pls help..

just turn on bluetooth in ur mobile and then turn on ur bluetooth headset by holding the power button for atleast 5 sec and if blinking green light show up it means that it is turned on,if it shows blinking red and green then it is ready to get paired with ur mobile phone so u can straight away connect the bluetooth by selecting handsfree and new device and in the list of divices select hbh608 and get it paired.if it shows a blinking green then hold the volume increase and decrease button at the same time for 5 sec and then the light turns blinking red and green and then u can go to handsfree and new device and select HBH608....its easy try doing that...it workss....