Question about Haier HWR08XC7 Air Conditioner

1 Answer

E1 Error on air conditioner

After a rainy day, the ac stopped on its own and displayed an E1 error. I ignored it and the ac turned on again, but soon after displayed the E1 error. The E1 error went away and worked, but blew warm air instead of cold, so I cleaned the filter. I have the ac on cool and the temp is set at 61. A few hours later, I decided to look online to troubleshoot the problem and unplugged the ac, but when I plugged it back in, the E1 error showed again and I couldn't do anything. I used the remote and and it worked again, but only blew warm air. The temperature that is displayed is stuck on 82 degrees, and just went up to 83, but then back to 82. I don't know what to do and it's really warm. Please help.

Posted by Ali A on

Ad

1 Answer

theaircoguy

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

It's time to call a professional. Call the manufacturer and ask them who they recommend in your area. Note :Some questions can be answered if you put enough information such as brand and model number.

Posted on Mar 25, 2017

Ad

2 Related Answers

shinakpas

  • 2 Answers

SOURCE: HELLER MOBILE AIR CONDITIONER

that's the way it should work, after you set temp to 20 degrees, display jump to the inside room temp in your case 25 or 29

Posted on Jun 14, 2010

Ad
hvac1960

R Subramaniyam Iyer

  • 2133 Answers

SOURCE: E1 error code

Replace room sensor.

Posted on Jan 04, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

E1 error code displays when unit is plugged in I have a wall unit with about 10,000 BTU capacity. Two days ago, it quit working and displayed the E1 error code. I unplugged the unit, let it sit for 10...


highly annoying issue error code E1. After hours
of fan operation, the error code E1 will appear on the seven segment
LED temperature display. This error code is intended as a reminder for
the user to clean the air filter. However, because the procedure
outlined in the user manual does not clear this error code as
indicated, and the appliance has a nonvolatile memory that cannot be
reset by simply unplugging it, the user of the appliance will become
mightily frustrated, standing in potentially sweltering heat watching
the appliance repeatedly shut down in the midst of operation with the
"E1" display flashing.

Believe it or not, that is what it does: if you unplug it to remove the
"E1" code from the display, and plug it back in and re-start it, it
will simply run for anywhere from a few minutes to a few hours, and
then merrily shut down again with the same flashing "E1" code.

So you will come home to a hot bedroom, living room, etc. unexpectedly,
and you will NOT be amused, as I was not.

Many people at this point, having put the manual under the canary or
some such, will simply return the unit and never buy another Sharp air
conditioner. But for the tech-savvy and search-adept, I offer the
following procedure to clear the nefarious E1 indication, and obtain

1. Power down the air conditioner using the "power" button on the front
panel.
2. Unplug the air conditioner from the wall socket.
3. Hold the front panel "power" button down and plug the air
conditioner in. Continue to hold the power button down as the machine
goes through a brief test sequence (fan & compressor each come on
briefly, etc). There is a "beep" sound at the end of the test sequence,
and the machine will be off. At this point, you can release the power
button.
4. Unplug the air conditioner.
5. Plug the air conditioner back in.
6. Congratulations! You should now be able to operate the air
conditioner normally for another 720 hours, but only if you followed
the instructions above EXACTLY.
_____________________________________________________
Was this solution helpful? Show your Appreciation by rating it.
Thanks for using fixya support..You have a wonderful day

Jun 05, 2008 | Haier hwr10xc6 Air Conditioner

2 Answers

My air conditioner want turn on or anthing and it shows e1, whats this mean


The E1 code is an error code that appears on the LED temperature display of some digital air conditioners. The error code could mean anything from dirty air filters to a damaged room thermistor, a safety connected to your thermostat that detects room temperature. Troubleshooting the cause of this error code may improve your air conditioner's performance

Sep 15, 2013 | Haier HWR06XC7 Air Conditioner

1 Answer

F2 E1 error shows on display. KitchenAid model KESC308LSSO Electric range. Oven stops working after 90 minutes at 350 Def. F. Starts working again after cool down.


On your model the "F2E1" error is for a faulty control board and it will need to be replaced. Here is the part to order.

The part comes with a 365 day, any part, any reason return policy.

Nov 24, 2012 | Kitchen Ranges

2 Answers

E1 F5 Error Code RPD-305-PDS14 Whirlpool Double Oven. Woke up to code. Turn Off/On/Breaker and Appears to re-boot, until you turn the oven on, then 30 seconds later back to E1 F5. I replaced the whole...


An E1F5 coupled with an E1F2 or E0F2 all indicate a faulty touchpad. Fixyourboard.com offers replacement Ledgestone Technologies touchpads for Whirlpool and Kitchenaide oven models. Reach out to them for more information 512-355-1108 or [email protected]

fullsizerender-crjxtk2pui4xc5qqbhljddcq-4-5.png

kp1b1705a3-crjxtk2pui4xc5qqbhljddcq-4-9.jpg

Feb 12, 2010 | Whirlpool GBS307PR Electric Single Oven

1 Answer

Error mesege Showing E1


The E codes E1-E7 are displayed in the copy counter.To display both digits of the E code press the ENTER key.When the machine detect E13 condition E1 is displayed in the copy counter.Hold down the enter key and 13 is displayed.
E 11 - Exposure lamp error.In this case check the exposure lamp continuity,the thermofuse is open or power suplly board defective.
E 12 -Exposure lamp error .AC drive defective,main board defective
E 13 - Zero cross signal error.Main control or DC power board defective.
To clear the service code turn OFF/ON the machine.

Sep 09, 2009 | Ricoh Office Equipment & Supplies

1 Answer

E1 displayed and AC will not come on


These units have a capacitor that cannot be replaced. You'll need to buy the whole circuit board. I didn't bother with mine, I just went and bought another unit. 108 bucks.

Jun 30, 2009 | Haier HWR08XC7 Air Conditioner

4 Answers

Tredmill error code e1


Trimline treadmill starts up then code E2 comes up, and the display shuts down. 
Any ideas???

Apr 02, 2009 | Nautilus Tr300 Treadmill

1 Answer

Dryer stops soon afetr cycle starts, E1 appears


ensure lint trap is clean and venting is not restricted or blocked.

E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.

Feb 10, 2009 | Whirlpool GEW9200L Electric Dryer

5 Answers

Error code E1 54 on samsung air conditioner split


A Bit of a late reply but E1 54, is indoor fan fault.

Dec 31, 2008 | Heating & Cooling

Not finding what you are looking for?
Haier HWR08XC7 Air Conditioner Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Heating & Cooling Experts

Tom Chichester

Level 3 Expert

59316 Answers

JOHN LAPIER

Level 3 Expert

2601 Answers

Steve Pack
Steve Pack

Level 3 Expert

4331 Answers

Are you a Haier Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...