Question about Pride Mobility Products Health & Beauty

Open Question

My lights on my Pride Jazzy keep flashing and it won't move. Can you direct me to someone who can fix it.

Sales order 30821 Customer ID 44558 received 12-21-2010 My Battery condition meter keeps flashing and it won't run. Is there an emergency number that I can call/ Beryl Ferranto 40 Bill Bush Rd. Picayune, MS 39466

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 40 Answers

SOURCE: problem with joystick on Jazzy 1103 ultra

You will need to take it in for repair. 8 bar flash usually means you have a bad joystick/controller. They can sometimes send it in to the manufacturer to have it repaired. Find a reputable dealer and relay this info to them.

Posted on Apr 01, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: My Jazzy select wheelchair does not run

you move the joystick and can hear something quicking in the motors

Posted on May 18, 2009

Ad

Barry Nixon

  • 103 Answers

SOURCE: elctric wheelchair, flashing rapidly the error display

Have the batteries load tested and be sure that the chair is in gear.

Posted on May 26, 2009

oregoon

  • 175 Answers

SOURCE: looking for a weather cover for my Pride Jazzy 610

A good substitute, and cheaper than buying it from Pride is to go to WalMart, etc and get a cover for a bbq grill.

Posted on Jul 11, 2009

Barry Nixon

  • 103 Answers

SOURCE: Jazzy wheel chair

When a chair sits for a long period of time ( four weeks or more) without being charged, the batteries die. To help you with the freewheel mode I would have to know what model of Jazzy it is.

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red flashing wrench light power comes on then goes off no power


check your battery connections they are giving a code that something there maybe wrong. For instance cable slipped off or the battery connections. The connections may have been installed wrong, especially if this happen directly after someone changed the batteries. Strege Mobility

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

May 01, 2016 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Jazzy 1107 power chair won't move


3 flashes indicate that there is a short circuit to the left motor and battery connection. Check wiring and connections

Jun 14, 2013 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

My jazzy 1170xl plus won't move. When I power it on the lights come on like there supposed to but as soon as I move the joystick the battery level lights start to flash rapidly. 9 of the 10 lights...


Code 9: brake fault. Check motor connections and make sure that the levers are in the engaged position - if you can roll the chair the gearbox is not engaged.

Apr 29, 2013 | Pride Mobility Products Jazzy 1170 XL Plus

1 Answer

Why are the lights blinking and it won't go


read manual,lights flash when in security mode,everyt model has a unlock procedure with the buttons on the joystick control.

Jan 23, 2013 | Pride Mobility Jazzy 1143 Power Chair -...

1 Answer

Blinking yellow wrench light on pride jazzy 614 HD


Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

Jan 06, 2013 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Pride jazzy 600 power wheelchair controller lights flash


make sure the motors are not disengaged, turn off chair, can you move it by pushing it? if so lock the wheels and try again. next is the controller in lockout. press and hold the on button till it beeps push joystick forward til it beeps pull it back til it beeps turn off try again. you can call 1-800-800-8586 for tech support

Sep 28, 2012 | Pride Mobility Products Pride Jazzy 600

1 Answer

I charged the batteries for 12 hours and then turned the chair on. The batteries appear to be bully charged, but the chair will not move. The joystick is flashing 8 times. Apparently a joystick fault? ...


There isn't too much you can do to fix this problem. You will have to have the joystick replaced. If Medicare paid for the chair then they will pay for most of the repair costs contact the provider that sold you your chair to have them order a joystick from Pride and repair the chair for you Hope this helps

May 04, 2011 | Pride Mobility Products Pride Jazzy 600

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeff Bird

Level 3 Expert

1346 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...