Question about Connex 3400HP Amateur Radio

1 Answer

The channel selector will not come on

The radio works but the light that tells you what band and what channel you are will not work or come on or glow. so i have no idea what channel or band i am on.

Posted by hawkeye829 on

Ad

1 Answer

kathykinzer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

REPLACE THE TINY BULB...DUH, use a meter to determine positive a neg on supply, hook up backwards and you may blow the bulb..

Posted on Aug 14, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Channel selector only works going down not up


there is two common connections to the channel selector

up and down

resolder the channel sectors pins

then it will work

its a broken connection to a common pin
if its not a break on the selector to the PLL data bus then

use DE-OXITE 50 {this one no others for selectors} look on ebay for it

Oct 07, 2014 | Magnum DeltaForce CB Radio

1 Answer

Dx-959 freq counter an channel selector don"t


Hello, please tell me what you were doing before and at the time of change. Were the digit lights recently switched? Please give me a little more information so I can be more specific in my answer. Thank you.

Mar 01, 2011 | Galaxy Radios DX-959 40-Channels Base CB...

1 Answer

My connex 3300 wont transmit anymore and the talk back wont work either,i have tried a different mike and when you key it up the meter still won't swing.


Plug in an external speaker to the pa jack ... Switch the band selector to pa and see if you hear yourself... No? Bad audio chip

Dec 29, 2010 | Connex 3300 240-Channels Base CB Radio

1 Answer

Haven't used my dx-88hl cb for years. what d9 i set the band on?


I'm not going to be corrected on this as i'm tempted to say A or C and sometime D. Instead i would say switch channel to 19 then watch frequency counter as you change band selector until you find 27.185 and you have arrived.

Dec 27, 2010 | Galaxy Radios DX- 88HL Base CB Radio

2 Answers

How do get my magnum cb on 19


Its very easy on this radio because it has a built in frequency counter. I can't remember off the top of my head but its most likely band letter A, then turn the channel selector to 19. If you are on the CB channel 19, the frequency counter will read 27.1850.

If band A channel 19 is not 27.1850 then leave the channel selector on 19 and flip through the band letters until it reads 27.1850. once you have found it, that letter is the CB band. channels 1 - 40 of the cb band.

Nov 15, 2010 | Magnum S6 Base CB Radio

1 Answer

Hi i have a maxon Radio i am not sure what model it is as it does not say the model. I was wondering how i would programme the radio so that it would work on a certain frequency


if it is a CB radio, you are stuck on the 27mhz band, and the channels that it comes with. I am not familiar with maxon radio's. Some radio's the PLL chip can be controlled to shift the band the radio works on. This is still limited to the 10-11 meter bands. You can go a band up, and a band down usually.

I have no clue if this radio is capable. So I couldn't tell you how to do it.

I can tell you, that you cannot just pick a frequency and make it work on it.

Oct 24, 2009 | Radio Communications

2 Answers

CHANNELS MOVED OR MISSING


  • Yes, the PCB band selector board. That's exactly what's wrong. You can replace this yourself. The board is held on the side of the radio with one little screw and has 3 or 4 connectors that plug into it. Maycomm is where I get my new Galaxy parts from http://maycomcomm.com/

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards,Tony

Sep 01, 2008 | Galaxy Radios DX-33HML 40-Channels Base CB...

1 Answer

Dx-88 HL


You'll need to take it to a repair shop. Because it transmits its under FCC rules so a certified tech needs to work on it.

Or take it back to where you got it and have them correct the problem.

Dec 29, 2007 | Galaxy Radios DX- 88HL Base CB Radio

Not finding what you are looking for?
Connex 3400HP Amateur Radio Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Brad Brown

Level 3 Expert

18563 Answers

Tony Raia

Level 2 Expert

264 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...