Smeg WDI12 Front Load Washer / Dryer Logo

Related Topics:

Question about Smeg WDI12 Front Load Washer / Dryer

Open Question

WDI12c shows error code E05

Hello all, My WDi12c shows up error code E05 and beeps. This happens about 5 minutes after I put it to a wash cycle. Interestingly if I move it to a program with prewash it will prewash and then stop. I have checked the hoses and filters they are fine. Any help would be appreciated.

Posted by Mike Seer on

Ad

1 Related Answer

Anonymous

  • 1 Answer

SOURCE: Smeg Washing machine

This happened to us before and we had to actually reset the unit. I had to call the tech support and they walked me through the process.

Posted on May 29, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What does ERROR CODE e05 means in "KONKA" WASH MACHINE

GOOGLES ANSWER TO QUESTION BELOW
https://www.google.com/search?q=What+does+ERROR+CODE+e05+means+in+%22KONKA%22+WASH+MACHINE&oq=What+does+ERROR+CODE+e05+means+in+%22KONKA%22+WASH+MACHINE&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8
1helpful
2answers

Washing machine flashing E05 but manual only goes to E04 Just put on delicates & now beeping & flashing Model XQG70-DA112PE bought 2014

Washing machine error code E05 usually refers to the hot water temperature sensor at the back of the tub, it's not sensing a temperature change. It's not an error that can easily fixed by the user, so it is not listed in the manual. It could be the sensor itself, the heater, the controller or the wiring. Call for repair.
0helpful
1answer

Candy error e05

may need to replace the ntc or they come with the wash heater unit
0helpful
1answer

I have a Hoover H160i that is coming up with E05 error. Any ideas?

Thank you. I ran a 2 and 3 wash (60 and 40 degree wash). It allowed me to put it onto a rinse/spin/cycle but it didn't allow the wash.
0helpful
1answer

Smeg wdi12c is vibrating so much on spin cycle it moves about 10cm out and i need to hold it back, any ideas

Try adjusting the machine feet. one or more of them will have a lockable adjustment. Get the weight evenly distributed on the floor.
1helpful
1answer

Kenmore front load washer error code E 10 - washer stops and beeps periodically and needs to have start button pushed again to complete cycle. Seems to happen one minute into cycle and then a coupleof...

1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
0helpful
3answers

WDI12C Machine Will Not Drain - Error Code E06

remove the two wires from pump connect two wires with a test bulb. this would eliminate the control issue if the bulb lights. 240 volt bulb. take it from there
2helpful
1answer

Smeg Washing machine

This happened to us before and we had to actually reset the unit. I had to call the tech support and they walked me through the process.
Not finding what you are looking for?

112 views

Ask a Question

Usually answered in minutes!

Top Smeg Washing Machines Experts

matt
matt

Level 3 Expert

1661 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

49960 Answers

ray gallant

Level 3 Expert

74163 Answers

Are you a Smeg Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...