Need help power light flashes no screen

Question edited for clarity, your television is 'Nordmende', not 'Norfmende'.

Time for a new one, but try the power reset first as mentioned here.

The standby light on my nordmende tv keeps flashing

JustAnswer https://www.justanswer.com > TV Problems
Sep 27, 2012 - Unfortunately, the symptoms you are experiencing (flashing power/status light, tv won't power on) are generally symptomatic of an internal ...
1 answer · Top answer: p0llinate : Hello, and welcome to justanswer, a pay site for expert technical help. My ...

How to fix my nordmende tv as blue light is flashing and ...

Ask Me Fast https://www.askmefast.com > How_to_fix_my_nordm...
Its the power supply board, capacitor(s) have gone. Solder on new or replace board. source: 26" lowry tv red and blue standby light flashing and tv wont turn on?

• 
  

  My nordmende tv model nmh077fhd blue light is flashing ...

  https://www.askmefast.com > My_nordmende_tv_mo...
  Normende tv red light wont come on Nordmende tv blue light flashing Nordmende ... said: nope. will turn on and work fine until the screen dims, goes black.

https://www.google.com/#q=sharp+LC60E78UN+green+flashing+power+light

The problem is likely with the screen itself. The power supply usually supplies both screen and speakers and has a light flashing on it indicating that it has power. Screens are often not worth replacing unless under warranty as they can sometimes cost as much as new TV to replace.

Check the power options properly in the control panel.

Since it sounds like an issue with the Power first try to release flea power.Disconnect the charger,remove battery,press and hold down the power button for 30 seconds.Reconnect the battery and charger.Turn on system and check if it turns on. For further help please check Dell Inspiron 1525 Manual. Also confirm if the light on the charger stays on,when connected to the system.

One or both your screens have blown.

Try removing the motherboard from the screens and attach the battery the green light should turn on and stay on.

Now attach the lower screen and turn on. If the screen is ok the screen and green light will flash and then turn off. (if the screen doesn't flash the bottom screen is you're problem and will have to be replaced)

If this happens the problem is then you're top screen which you will have to replace.

WHEN FLAT SCREEN SHARP LCD IS ON .. BLIKNING ON BOTTOM OF SCREEN SAYS OPC

try reinstalling the printer driver again

When i try to turn it on the power button flashes a code. The power button lights up once for a second, then turns off, then flashes quickly nine times and lights up once again for a second before turning off. The screen doesnt turn on at all, nor do the speakers. Any help would be highly appreciated.

onbord video maby might wann add pci card video see if u get screen ok thx nick