My Sharp Al-1041 Copier-Printer will not power on. No lights whatsoever. I read the manual. There is no fuse. All the doors are closed. I have unplugged the power cord and attached again. Tried everything I can think of with no luck. It was fine yesterday.
Make sure you are not plugged in to an outlet controlled by a wall switch. Bypass any power strips.
SOURCE: Sharp AL-1655CS Laser Printer stays in download Mode
you can´t. the only way to fix that is replace to main pwb. i have 3 whit the same problem.
SOURCE: Driver for Sharp AL-840 Laser Printer
This site provides you access to the driver you require
-you will need to know your operating system (XP or 2000, etc)
http://www.driversdown.com/drivers/14637.shtml
hope this helps
SOURCE: Sharp AL 2080 Copier
There is a transparent plastic knob underneath the scanner unit that holds it in place while in its box. After installing you must turn clockwise this plastic to release the scanner mechanism. otherwise a L1 Error will appear on screen.
imaginguru
[email protected]
SOURCE: SHARP AL-2040CS offline after reboot
Official Sharp driver had set "use printer offline" setting in the printer properties context menu. After unselecting the "use printer offline", printer is printing again, even after reboot...
SOURCE: I need the scanner/copier part of the driver CD - Sharp AL-1655cs
I'm not sure where you downloaded the printer driver but the Sharp website has a download link to the printer and scanner driver according to their website.
http://www.sharpusa.com/products/TypeSoftware/0,1086,20,00.html
90 views
Usually answered in minutes!
×