I have a Panasonic PT-47WX49E with a Main board TNPH0370 that as I understand is defective. Can I easily pull that board out and get repaired say at http://www.ptscorp.com/? They seem affordable and at $184 seems like a good deal. I'd hate to sell my non-working hidef TV just because I can't get a system board fixed locally. Any help is appreciated
97 views
Usually answered in minutes!
This 49" TV has been sitting unused in my garage for over 6 months. The lightbox is currently able to be slid out so I would just need to remove the green system board to ship.
I have a fairly good degree of mechanical/electrical ability, install/uninstall motherbaords for a living, but have never worked on a television.
If there's a service manual available I would like to learn how to remove it. Or perhaps you could provide a few pointers on how to remove it?
thank you for your help..
I need to get the green board removed. Not a big deal to do myself?
Thanks I replaced it this past month and now just need to set convergence. I have a 15 page manual and can enter red CHK mode but not sure how to set Coarse Convergence (can't find COARSE DAC).
The whole picture needs to rotate about 7 degrees counter-clockwise so imagine the remote setup can't offer this kind of adjustment.
×