I have a PT-47WX49E and need some help with convergence and am looking for a schematic and solution. Thanks!
If Any one out thier still has the scamatics for the 47" please email them to me. at [email protected].. thanks a million.
Can someone help me take the board out? I dont know how to take off the white clips tracers on the side??
Hey CPOSWN,
May I get the schematics for PT47WX49 sent to
[email protected]? Thanks!
Upodate to the update and so on - Could not find the correct resistors so got a new 1080p LCD. Thusly - Have taken apart the Pani and am offering up the parts here to whoever wants to make an offer for the shipable parts - R, G, B tube circuts for example. Misc cables. Speakers and tweeters. The tubes (Well, 2 of them anyway. I made th emistake of breaking the seal on one of them so the liquid/oil for the cooling drained out). The lens's. Screws. So on. Please email to filmy_1 (at) hotmail (dot) com over the next week if you are interested. (Today is September 15, 2007)
Passer byer im in need of the schematics as well if anybody can help! email me @ [email protected]
Wow, My PT-47WX49 lost control of it's red gun just yesterday. Could I get a copy of the schematic too from someone??? [email protected]
Any chance i could snag these schematics from you as well cposwn. Thanks much either way! Al adrenaline78 at yahoo dot com
Can some one Email the service manual for this unit... PT-47WX49 47 in. Rear Projection Television [email protected]
Just an update. cposwn sent me the schmatics and I located the correct info on the resistor. it is not listed on the "aprts" list, but it is listed on the schematic. it is a .27 resistor. No one around has one, it seems like it not very common so I am a looking.
I have the same problem with convergence going off on the green gun and the TV shutting down. Pulling the plug and plugging it again, then power on, repeats the same thing. I have full schematics. Post an email address and I'll send them to you. Maybe you can tell me how to fix mine, I think the A board is going south.
Ok - following up - I was trying to cross referance and I did locate the something - R7066 is on the circut board, however this is not on the part slist - cloeses is R706, which is a 1/2 W, 5% tolerance rated at 68k. Does this sound correct to anyone out there? Is R706 = R7066?
As I did not get anything I took a guess and replaced it with a 100k - 1/2w resitor. The set now comes on for 6 - 8 seconds and goes off so that couldn't have been the correct one. On the other hand before I replaced it the set would come on go off instantly, plus the resistor I replaced would glow so in a way it is a step in the right direction. Any help would be a good thing here. Thanks.
>>>
RE: Snakehead - going to the website you mentioned turns this up: "No matching records found for PT47WX49E. Contact the manufacturer for more information." RE: cposwn - I would like the schematics, I need to see the layout of the TNPH0370 board to find part numbers. Please email to filmy_1 (at) hotmail (dot) com Thanks
Commuter, I have the schematics in pdf form. Glad to send them to you if you'd like. Let me know. Scott
I will email them to you tonight as soon as I get home. There are two files so expect two emails, Scott
nyc tech man, I emailed you the two files today for the tv. Scott
adrenaline, did I send you the schematics? If not drop me an email and I'll send them to you.
v/r, Scott
×
GO TO THIS WEB SITE www.samsphotofact.com you will be able to find your schematic cost about $20.00 to $40.00,good luck greetings from belize
438 views
Usually answered in minutes!
Scott, if you could email them to me I wouls appreciate it. My email address is bruced(at)lathropengineering(dot)com.
Thanks, Bruce
If someone could email me the service manual for the PT-47WX49E i would greatlt appreciate it. [email protected]
Covergence (green) is off and results in a shadow on the roght side of the TV. The green horizontal line does not seems to go all the way to the right.
If someone could email me the service manual for the PT-47WX49E i would really appreciate it. Thanks. [email protected]
CONVERGENCE BOARD IS BAD I GUESS TRYED ADJUSTMENT TECH MUST BE THE BOARD...
Has anyone replaced successfully? How much is the part and where did you buy it?
samsung plasma 42" pn42a450p1dxza
×