Intel D101GGC Motherboard Logo

Related Topics:

Question about Intel D101GGC Motherboard

2 Answers

Computer does not start

A computer with a D101GGC motherboard does not start. There is no beep or monitor singal. The fan is okay. As soon as the power is connected to the computer, the red drive access light comes on, but not the green power light. When the power button is pressed, the green light comes on, but there is no beep or monitor signal. Even weirder, the light on the DVD drive and the red drive light flash. What does this mean? What is the problem and how can it be solved?

Posted by Brian Wong on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace new motherboard

Posted on Dec 17, 2007

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 624 Answers

Before we begin we?ll need some more historical information: -Was this a functional computer that just stopped working or is this something you?re building? -If this was a working computer were any new programs, hardware, drivers or updates anything that changed recently? -Have there been any recent error messages?

Posted on Mar 22, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

A computer with a D101GGC motherboard does not start. There is no beep or monitor singal. The fan is okay. As soon as the power is connected to the computer, the red drive access light comes on, but not...

its a common problem with intel D101GGC motherboard, just open the case and unplug the dvd power cable and data cable, then turn on the PC it will work fine.
0helpful
1answer

I haven't used my computer in 3months, I have a D101GGC motherboard, No beep when i start and the monitor does not come on,

if ur c.p.u fan is going on then..plugout ur ram and clean it by pencil eraser then insert again, check ur c.mos battery and jumper,unplug every connection and replug tightly again
1helpful
1answer

When i turn the computer on it starts then

SOS beeps are post codes the computer sends to alert you of problems detected during start up.

The beeps can mean anything from over heating to bad memory detected. Find out what your Motherboard bio is and check Here. This has a handy beep code listing for many of the common mother boards.
Good luck!
Hope this helps!
0helpful
1answer

Computer won't boot , constant PWR problem (

i am also using same motherboard dg31pr intel but it does not reboot .......
because this is the problem with you monitor , just you change the monitor and try again .
this is only the solution to solve this as the tecnition said me.
0helpful
1answer

Processor fan

It sounds like your CPU fan is slowing down with age and thus triggering your motherboards warning 'slow fan' alarm, while it may just need a good clean (remove dust/grime) it may prove much easier to simply replace the whole fan anyway...
0helpful
1answer

6-second on and 5-second off beeps from motherboard

try different memory, this seems to be a common problem with those motherboards.
0helpful
1answer

No boot but a 5-second beep

sounds like your memory is messed up, try some different memory in your PC.
0helpful
2answers

Problem with intel d101ggc motherboard

Hi Rohit, you're CPU should not be running that hot & that is why you're system is restarting. Very soon the CPU will burn up.
Replace the CPU's HeatSink & fan assembly as soon as possible. The link I have posted is a list of the CPU's you're board can support.
http://www.intel.com/support/motherboards/desktop/d101ggc/sb/CS-025906.htm
Even at 70'c, that's too hot also. You're game is not putting that kind of load on you're CPU.




0helpful
1answer

ASUS k8N motherboard major error

try to go to Bios setup and select the default settings and restart your unit. after you restart tell me what happen.
Not finding what you are looking for?

231 views

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

19008 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...