Question about Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Maytag ensignia top load washer will not fill with water at start of the cycle?

I have a Maytag Ensignia washer that will not fill the basin with water during the initial phase of the wash. The water just continuously runs and empties.

Posted by michael_e367 on

Ad

1 Answer

Dan Webster

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 8,220 Answers

The drain hose has to be at least 30 inches above the floor or gravity will drain the machine. Also: If the water hose is jammed into the drain a siphoning affect will occur in some instances.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Aug 04, 2012

Testimonial: "That was definitely the case - I measured the drain pipe and it was just over 30 inches high. However, the hose was pushed all of the way down. I pulled it back up and tested it out and it works perfectly. THANK YOU, JW!"

×

Ad

3 Related Answers

Anonymous

  • 121 Answers

SOURCE: Have a Maytag Ensignia top load, Washer basket is

sounds like your balancing ring or your springs gave out underneath to balance load

Posted on Jun 11, 2009

Ad
woodchuck789

Charles T Nevin

  • 4070 Answers

SOURCE: The water continues to run into my Maytag Ensignia

If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water supply comes in is sticking. It needs replacing.

Posted on Oct 05, 2009

FixinFax

Leroy Elliott

  • 3085 Answers

SOURCE: My Maytag Ensignia top load washer continues to

Spraying some water onto the clothes while spinning is normal to help keep the clothes from wrinkling

Posted on Oct 25, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Maytag Ensignia and the water will run but the tub will not fill.


You may have to just raise the drain hose up higher. It sounds as if the water is going out the drain hose as it tries to fill.Drain hose should be up as high as the top of the washer.Hope this helps.

May 28, 2011 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Maytag ensignia makes a great deal of noise during rinse cycle


"If you dont have a noisy spin cycle and the noise you hear is only on the rince cycle, dont be worried, as this is totally normal. Water sprays onto the drum while the spin cycle is in progress and rewets the clothes to allow any existing soap to be desolved. This noise is in effect the water hitting the drum during the rince part of the cycle.

Sep 03, 2010 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

The water continues to run into my Maytag Ensignia after the cycle is complete


If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water supply comes in is sticking. It needs replacing.

Oct 05, 2009 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

The washer doesn't always fill up when we turn it on


Hi, Dose the water fill the first time you start it but, then will not fill in the rinse cycle? Does the water continually try to fill but never gets to the top?
I want to help.

Thanks
Vic

May 12, 2009 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

Maytag ensignia washer...cold water settings


You need to remove the cover and check the voltage to the cold water inlet valve. Do this with a volt meter while it is set to fill with cold water. It is most likely an AC voltage that is around 24 volts. If you have voltage then the valve is most likely bad.

Feb 16, 2018 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

Burning smell/noise with my Maytag Ensignia MAV7657EWQ Washer


it could be [motor] or 'condensur' for motor, starting to burn out or over heat, check drive belt as well for ware

Dec 08, 2007 | Maytag Ensignia 3.3 cu. ft. Top Load...

Not finding what you are looking for?
Maytag Ensignia MAV2757AWW Top Load Washer Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Sheldon Dedek

Level 3 Expert

912 Answers

Brad Brown

Level 3 Expert

18455 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...