My PT-47WX49 has a convergence issue. The convergence 2 blue settings on both the right and the left will not line up.
This happened out of no where last week the tv is 6yrs old.
I would like to look this manual over as well, If you would be so kind to send it to me.
What exactly went wrong with it?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the convergence needs replacement. You can get the panasonic PT53WX53 convergence repair kit from www.tvrepairworld.com which is correct for your model. The kit contains the parts and the CD with instructions
You can try restoring to factory defaults, and you can try the manual convergence option. If the manual convergence fails to reset (as in, the crosshairs physically will not move), then the convergence board is bad, and will need to be replaced or repaired (if you are a good circuit solderer).
Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html http://www.hdtvoice.com/voice/showthread.php?t=28929 Sony Convergence http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/ http://www.techlore.com/article/19631/Sony-Convergence-Procedure/
Sounds like you have a blue foldover in the convergence. Since tv has been worked on it could be bad ic, maybe not original, generic. I would say if you can open set and look in, look for the blue it should be marked. look for a loose connection. If you can have someone to gently tap around that blue amp and see if it moves are go away, it might be a simple loose connection and needs soldering. If not then my have to change ic again. Becareful cause set would need to be on to really check. Hope this helps.