Frigidaire Affinity ATF7000E Front Load Washer Logo
Posted on Aug 01, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

PT reads on display and it will not drain - Frigidaire Affinity ATF7000E Front Load Washer

Answer This Question

1 Answer

Electrolux

Electrolux

  • Official Brand Answer 4,342 Answers
  • Posted on Aug 01, 2012
Electrolux
Official Brand Answer
Level 0:

Joined: Mar 24, 2011
Answers
4342
Questions
0
Helped
1467770
Points
5907

Frigidaire does not have a "PT" technical error for any of their units. Please try to recall the error exactly by doing the following:

* Wake the washer by pressingany button.* Wait 5 seconds.* Press and hold the Start andPause/Cancel buttons simultaneously.* All LED's will go blank and after a few seconds the controlwill signal the stored code using audible beeps and blinking LED's. The controlwill repeatedly signal the code, as long as the Start and Pause/Cancel buttons are pressed. A two second pausebetween repeats affords you the ability to make accurate counts to identify thecorrect error codes.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Hisense 70 pt. Humidifier keeps shutting down and reads E9
It's the humidity sensor error or the drain line is blocked.
Read full answer
Oct 09, 2019 • Humidifiers
0helpful
1answer

My stairmaster 4400 PT shows "config rqrd" How do
Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD


Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD
Read full answer
Oct 14, 2011 • Stairmaster 4400 PT Stair Stepper
0helpful
1answer

I have a GE profile model # PFS22MBSAWW and about a year ago the digital display for the temperature reading would work intermittently. After some time I realized that when the condensor motor was on, the...
ou need to replace the main control board . in the back pt # wr55x10526 and you may also need the display pwb pt # wr55x10522 .. do the main board first and if diplay isn't working properly replace it also .. mm hope this helped .. feed back lps ..
Read full answer
Jul 10, 2011 • GE Profile Bottom-Freezer Refrigerator...
0helpful
1answer

I need the configuration code for a stairmaster 7000 pt. it just says config req. It has done it before but I cant find the code again. do yo know the code?
Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD

Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD
Read full answer
Aug 11, 2010 • Stairmaster Stepmill 7000 Pt
0helpful
1answer

We are getting an F02 reading. The hoses are
Long Drain
If the drain time exceeds 8 minutes, the water valves are turned off and "F/02" is flashed.
NOTE: After 4 minutes the "Sud" error will be displayed, then 4 minutes later the F02 error code will be displayed.

Press PAUSE/CANCEL twice to clear the display. Check the drain hose and make sure it is not plugged or kinked. Check the electrical connections at the pump and make sure the pump is running. Check the drain pump filter for foreign objects. If the above does not correct the problem, replace the pump.
Read full answer
Jan 06, 2010 • Kenmore Elite 45986 Front Load Washer
2helpful
2answers

Ld code appears intermittantly
ld is a long drain time...you may have something in he drain or a bad inpeller in the drain pump...it is taking too long to drain out
Read full answer
Sep 18, 2009 • Whirlpool Cabrio WTW6600SBT Top Load...
0helpful
1answer

07 pt reads error on odometre display
The computer is not talking to your dash or the dash is shorted out and needs to be replaced.
Read full answer
Jul 23, 2009 • 2005 Chrysler PT Cruiser
1helpful
1answer

Hi, We need solution for B-Ray connection to PT-47WX53G
We solved the problem with Sony experts from Vio. Thank you
Read full answer
Jan 03, 2009 • Panasonic PT-53WX53 53" Rear Projection...
1helpful
2answers

Location to drain transmisson fluid
a transmission does not have a drain plug.... you have to pull the pan with the fluid in it.....
Read full answer
Jul 26, 2008 • 2005 Chrysler PT Cruiser
0helpful
1answer

How to find meter reading on KM-1500
I believe you hold down the Clear/Stop botton and hold it and you will see PT- in the display then it will show the Total count in three sets of #'s in the LED display. It may also be that you hold down the "0". It's been awhile, but it is one of the two.
Read full answer
Mar 26, 2008 • Kyocera KM-1505 Copier
Not finding what you are looking for?

View Most Popular

Affinity ATF7000E Front Load Washer

  • Washing Machines

Related Question

My Hisense 70 pt. Humidifier keeps shutting down and reads E9

  • Humidifiers

Related Topics

95 views

Ask a Question

Usually answered in minutes!

Popular Questions

Frigidaire front load washer (LTF600ES1) Error E20

Frigidaire ATF6000ES Front Load...

Frigidaire washing machine collects water behinf door seal

Frigidaire GLTF2940ES Front Load...

How do I go to clean cycle-Frigidaire affinity ATF6000fs

Frigidaire ATF6000ES Front Load...

Frigidaire Front loading washer error codes E41 and E20

Frigidaire ATF6000ES Front Load...

Frigidaire Front Loading Washer, ATF6000ES stuck on pause mode - HELP!

Frigidaire ATF6000ES Front Load...

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...