Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Front Load Washer

My washer will not go throw a whole load with out stopping and blinking the error code 33 F Help

Posted by on

  • 3 more comments 
  • bkcota Nov 12, 2007

    abouy 5-8 mins into a wash cycle it starts to blink F33

  • Anonymous Dec 28, 2007

    What does F33 mean? I am having the same problem

  • momofteens Jan 04, 2008

    Anyone find the cause/fix for this? My HE4t kenmore is doing the same thing - it's barely 18 months old (won't buy another kenmore!).

  • ckrause Jan 08, 2008

    I'm having the same problem- very frustrating that there really is nothing out there to let us know what this means. I get all kinds of different errors too. The reason I like my machine is because it is so big, otherwise I don't use all the fancy cycles and stuff.

  • dt3boys Dec 04, 2008

    i have a 33 f error code to what does it mean?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Ok heres what u do take the bottom toe panel off the machine be sure to unplug it first. either in the panel or on the sides of the inside of the washer will be a tech sheet look up the error code and let us know what it is i cant remember off the top of my head what 33 is

Posted on Mar 20, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is Code 33 on Onan Generator Model12.5 HDKCB11506B?


You may be reading the code wrong, Code 33 shows up as blink 3 pause blink 3. This means it has a lower level code fault. To access the real code. Press the stop button 3 times fast within 5 seconds and re-post what the code is please. It may blink pause then blink again, that is the lower fault code that will help diagnose the problem.

Feb 10, 2015 | Onan Generator, 4000W, Gasoline

1 Answer

Frigidare ATF8000FSO error code 33


Hello edward, thanks for your post!

I see your Frigidaire washer is displaying an error code "33". However, it appears "33" is an invalid error code. Let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes.

If resetting the power does not correct the issue, could you please inform me of the new error code or if your washer continues to display "33". I look forward to assisting you. -Matt

Oct 01, 2014 | Frigidaire Washing Machines

1 Answer

Push Start button on our kenmore front loader washer model# 41744082400 and get error code 33.


Hi,
F33 error code indicates Pump drive system error. Try running the unit empty, set to a cold/cold cycle. If this does not help, you will need to have the unit checked by a service technician.


thank You

Sep 10, 2010 | Kenmore Front Load Washer

1 Answer

Washer does not finish cycle..it stops at spin and it displays a 'dc' code...what is this


The Service Manual for reference. Sears Parts Direct for reference.
dC code from the Service Manual = Distribute Clothes: The load is unbalanced, preventing high speed spin. Redistribute clothes.
Your wash tub is banging around during the spin cycle correct?
You can redistribute the wash basket load until the cows come home the issue will only continue to get worse. Maybe start throwing uC error codes to the console display for continuous unbalance error code.
Your FAV6800A or FAV9800A has a Clutch malfunction. It can be corrected if you are handy see this DIY fix Clutch Fix. post.
If you decide to dive in I will help you through the fix………Rich

Feb 07, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

LG TROMM - Won't spin - Spin button - blinking


The LG error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this error means as far as the washing machine is concerned it thinks the water isn't pumping out. A pump, or filter blockage is the most common cause but it could be caused by other faults such as a faulty pump, or even a blockage in the drain hose or somewhere else in the system etc.


LG themselves have some information on this error code..

http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6273

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!!

Aug 10, 2009 | LG WM2277H Stainless Steel Front Load...

1 Answer

F-33 code


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

http://media.fotki.com/1_p,stwwfrggtqfbrbbxgtqsskgwtqkq,vi/wgtbwqwssxsbwkbdtfwxrbfbddwwf/1/1303472/5961857/image9159087223444281043img-or.jpg

Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 16, 2009 | Kenmore 46462 Front Load Washer

3 Answers

Prima TV mod. HT2778P


Being that this is a very generic brand. These tv's are known as "throw aways" as when they break they are cheaper to throw away and replace.The companies offer little to no support. This tv will require professional service. If you need assistance contacting a professional near you to have it serviced please let me know. Please take a moment to accept and rate my solution.
Thank you,
Lee

Dec 07, 2008 | Prima C2012 TV

1 Answer

Kenmore elite front load washer


look for an error code on those washer it will be and f-02 something like that or HF FH it will have an f keep an eye out for that

Mar 19, 2007 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...