Installed a pioneer deh-27mp in a '92 nissan sentra. Twice. First one did not power up. Checked the power inputs and I have 12 from the accessory and 12 from the battery. These where measured arcoss the ground on the connector. Took the first one back. Put the second one in. No power. What am I missing?
Doesn't have a power antenna so the blue/white is not hooked up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ok for you and everynone ells having the same problem i was the peace of **** pioneer deh-27mp cd player clock their idiots just to tell you to fix the clock turn of the cd player then hold down the audio buton for probly 2 secounds the screen will do some ******* stufe then hit the station up or what ever key and to switch to the minuts hit the leaft and right arrow and ther you go jsut turn it on and your seat
red is 12 volt line that turns on with the key- the yellow is the 12 volt that stays on regardless of the key- the blue provides 12 volt to turn on an amp or to raise the antenna- the grey is the front right + speaker line-the grey with black right front speaker negative-white left front speaker + white/black is left front speaker negative- green is left rear speaker + green/black is left rear speaker negative purple is right rear speaker + purple/black is right rear speaker negative DO NOT GROUND THE SPEAKER NEGATIVE WIRES
Unless you are familiar with servicing them, it's risky, but can be done. Gently pry the top cover off. Remove four #1 philips screws from the CD mechanism. Gently lift out and unplug the ribbon cable connecting it to the motherboard. On the right side (as viewed from the front) there is a set of gears. These control the eject/intake motion. Start spinning (i can't remember which direction off the top of my head.).