Kenmore 44102 Front Load Washer Logo

Question about Kenmore 44102 Front Load Washer

4 Answers

Kenmore front load washer will not spin

My washer is just over one year old and will not spin fast enough to remove water from the clothes. I have checked the belt and that appears to be in good shape. I hear what sounds like pieces between the outer and inner drums, but am not sure how t get in to investigate. Any suggestions??

Posted by Bruce Ganie on

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Although I had just cleaned the filter about 5 weeks ago, my wife had recently washed a pillow that came apart in the wash. I did not know this but noticed the clothes dripping wet after the high speed cycle. I was thinking it was the drain problem like I read in the post from bluefuzz. I pulled the filter and it was LOADED full. Before calling the repairman, CHECK YOUR FILTER! You won't need to disconnect any hoses.

Posted on Jan 18, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a similar problem. The machine went through all the steps, except the last one of draining and spinning. There was a buzzing sound if I attempted to run the "drain and spin" step. The solution was to remove the front panel at the bottom, remove the two pipes hooked up with a metal round clasp, and check for blockage. I found a sock + some coins in there. I don't know how to sock managed to get there, but clearing that away fixed the problem. It seems that if the machine does not drain, it will not go into a fast spin cycle. So, check the draining capability first.

Posted on Jan 13, 2009

Ad

Debbie Shehan Suhy

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had the problem where my Kenmore front load washer would not go into the fast spin. The repairman replaced the spin control unit and the motor with still no fast spin. He came this morning to replace the front control board and still nothing. He then decided to replace the door/lock unit and that is what did it. After about a month, now I am able to wash my clothes and not have to hang them up to drip dry enough for me to place them in the dryer. By the way, the manufacturer said that it was either the spin control unit or the front control board. I guess they will have to revise their fix for this problem.

Posted on Aug 06, 2007

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

If u hear stuff between the basket and drum its time to call a repair and get your check book thats a two man job that takes about two hours to completely rebuild with a new basket outter tub and pulley replacement. also u might check in the door the upper right hand corner theres a hose that goes into the drum take that off and feel in there sometimes stuff gets in there

Posted on Mar 21, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

OK- my Kenmore He2 won't spin fast enough to drain when there is a heavy load involved. This is what I've done- emptied the filter- lots of change and other gunk, cleaned out attached hoses and the p

Check the shocks on the drum to make sure they are ok. if they wear out the drum spins out of balance and the computer wont allow it spine because it would WALK and damage itself.
0helpful
1answer

Clothes are very wet after spin cycle This unit has several spin speed settings, machine does spin but not fast enough to remove water from clothes

Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101
1helpful
1answer

Front loading washer won't spin

my amana washer wont spin and does not drain
0helpful
1answer

Kenmore 90 Series washer needs two spins to remove water

We have exact same washer. It is 11 years old. We are at a point where we have to spin it 7 times and then still isn't too dry. It dies yesterday a very loud death. Mentioning this here because it could be a foreshadowing of your Kenmore 90's future.
5helpful
1answer

Kenmore washer spin cycle doesn't leave clothes dry

SOUNDS LIKE THE TRANSMISSION IS NOT ALWAYS SHIFTING INTO HIGH SPEED MODE,TRY A MED. SIZE LOAD AND SEE WHAT THAT DOES,TRANSMISSION MIGHT JUST BE GETTING OLD WHIH IS NORMAL-MIKE
0helpful
2answers
7helpful
2answers

Washer won't spin fast, only slow

tyr removing the lower acees panel from the uint , ther is a "button trap" located there to catch debris from entering pump assy, chances are its clogged and if it cant drain all the water it wont go into high speed spin, also you MUST use an HE detergent. HE detergent specifically designed for front loading washers
Not finding what you are looking for?

567 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85240 Answers

Cindy Wells

Level 3 Expert

6491 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...