How to print a copy of the receipt ?

If your Sharp XE-A203 cash register is not stopping printing receipts or transaction records, you can try the following steps to troubleshoot the issue:

1. Clear any pending transactions: Press the "CA/AT/NS" key to cancel any ongoing transaction and clear the display. If there are any pending transactions in the register's memory, complete or void them to clear the system.
2. Check the paper roll: Make sure the paper roll is not jammed or empty. Replace the roll with a new one if necessary, and ensure that it is loaded correctly.
3. Reset the cash register: Press and hold the "RC/ON" key for five seconds to reset the register. This will clear any error codes and may resolve the issue.
4. Check the programming: Make sure the register is set up correctly and that there are no programming errors. Refer to the user manual for instructions on how to check and reprogram the register.
5. Seek technical assistance: If the issue persists, contact Sharp support or a qualified technician for further assistance. There may be a hardware issue that needs to be addressed.

It's essential to ensure that the problem is resolved promptly as continuous printing can lead to a waste of paper and ink, which can be costly in the long run.

Amazon.com: Customer Reviews: Learning Resources ...

www.amazon.com/...Register/product.../B0006N8X3...

Amazon.com, Inc.Learning Resources Pretend & Play Teaching Cash Register ... However, it recentlystopped working and simply said 'DRAWER OPEN' no matter what we tried ...

Casio - Support

www.casio.com > Home > Support > FAQs

CasioFrequently Asked Questions - Cash Registers. ... How I fix my cash register if the Journal/Receipt is not printing? How do I load paper in my cash register?

Not Assigned Error Message On Sharp Cash Register ...

? 1:06
https://www.youtube.com/watch?v=cq1_zcY_DuQ
Jul 12, 2010 - Uploaded by shopstuffltd
Instructions on how to clear the 'Not Assigned' error message on the Sharp XE-A203, XE-A213 or XE-A303 ...

"Head Up Error" on a Sharp cash register - YouTube

? 2:53
https://www.youtube.com/watch?v=NXMbLjfjdro
Jan 15, 2013 - Uploaded by sharpelectronicsusa
Clearing the "Not Assigned" and "Head Up" Error on the XE-A40S, XE-A41S, XE-A42S, XE-A401, XE-A402 ...

Re: Cash register notification stopped working - The eBay ...

1 turn your key to the position between REG and Off
2 Press rcpt button once
3 turn back to REG

1. your cash register is not printing the receipts,becouse your cash register have a virou

To disable receipt printing:

• Press the Rcpt/PO key in the OP X/Z position. This key toggles the receipt printing status ON andOFF.
• To check the receipt printing status, turn the mode switch to the OP X/Z position or press the CL key in the REG mode.
  
• When the function is in the OFF mode, the receipt off indicator “_” illuminates.

To issue a receipt when receipt ON/OFF function is set to OFF:
If your customer wants a receipt after you finalized a transaction with the receipt ON/OFF function in the OFF
mode, press the RCPT/PO key. This will produce a receipt. If more than 50 items were entered, the receipt will be
issued in a summary receipt format. Your register can also print a copy receipt when the receipt ON/OFF
function is in the “ON” status.

Sharp Electronic Cash Register XE-A202
Will not print out receipt. Paper will roll out. just not printing

The following is the method to turn the receipt printing on/off:
Receipt ON/OFF function
You can disable receipt printing in the REG mode to save paper using the receipt ON/OFF function. To disable
receipt printing, press the Rkey in the OP X/Z position. This key toggles the receipt printing status ON and
OFF.
To check the receipt printing status, turn the mode switch to the OP X/Z position or press the lkey in the REG
mode. When the function is in the OFF mode, the receipt off indicator “_” illuminates.
The register will print reports regardless of the receipt state, so the paper roll must be installed.
To issue a receipt when receipt ON/OFF function is set to OFF:
If your customer wants a receipt after you finalized a transaction with the receipt ON/OFF function in the OFF
mode, press the Rkey. This will produce a receipt. If more than 50 items were entered, the receipt will be
issued in a summary receipt format. Your register can also print a copy receipt when the receipt ON/OFF
function is in the “ON” status.

All the best!
Greg

Hi.
You must press clear to remove an error from the display (including the paper empty error). Give it a try and see if it starts working.

Mark

I don't have this particular cash register, But I took a look at the manual and I recommend the following:

A. Turn the cash register off.

B. Unplug it.

C. Remove the batteries.

D. Wait at least five minutes.

E. Initialize the cash register. This procedure was copied from thwe manual:

In order to operate the cash register properly, you must initialize it before operating for the first time. Follow this
procedure.

1. Insert the manager (MA) key into the mode switch and turn it to the REG position.

2. Insert the plug of the AC power cord into the AC outlet. The buzzer will sound
three times.

IMPORTANT: This operation must be performed without batteries installed.

3. The cash register has now been initialized. The register display will show
"0.00" and then “NO BATTERY”.

If the buzzer does not sound when the plug is inserted, the initialization has not been done
successfully. (This will occur when the voltage is high because you operated the cash register
before starting initialization.) Wait at least one minute after pulling out the plug and insert the plug
again.

F. Download trhe manual from here:

http://www.ormsson.is/skjol//skrifstofutaeki/xe-a203,213,303_manual.pdf

And proceed to program your sales tax (or VAT), departments, clerks, etc.

Hi. turn key to OPX/Z mode. Press the receipt button. Turn back to REG mode. Now when you want to issue a receipt, press the receipt button.

Mark