Need Comcast Remote Code for Input Button on an LCD Samsung

Comcast uses at least 11 different remote controls. I referred to the manuals listed on their remote control page for instructions on programming the three Comcast-branded remote units:

Comcast Universal Remote (Red OK/Select button)
Sylvania LCD TV codes: 20000, 20035, 20043, 20081, 20593, 21593, 21781
Procedure:

1. Turn on the TV.
   
2. Press the TV button once.
3. Press and hold the Setup button until the TV button blinks twice, then release Setup.
4. Enter a five-digit code from the list. If this is done correctly, the TV button will blink twice. If you enter an invalid code, the TV button will produce one long flash and the remote control will exit the program mode.
5. Aim the remote control at the TV and press the Power button. If you have the correct code, the TV will turn off. If not, repeat steps 2-6 with a different code.

If none of the codes work, you can try the code search procedure:

1. Turn on the TV.
2. Press and hold TV. Press and hold Setup until the TV button light blinks twice, then release Setup.
3. Press 9-9-1. The TV light will blink twice.
4. Press and release the digit 1. The TV key will blink twice. Press the Power key.
   
5. Aim the remote control at the TV. Press CH+ until the TV turns off. You may have to press numerous times until the remote control finds the right code in its library. Stop when the TV turns off.
   
6. When the TV turns off, press Setup once to lock in the code set. The TV light will blink twice.
   

Comcast Universal Remote (Grey OK/Select button)
Sylvania LCD TV codes: 0000, 0035, 0043, 0081, 1781
Procedure:

1. Turn on the TV.
   
2. Press the TV button once.
3. Press and hold the Setup button until the TV button blinks twice, then release Setup.
4. Enter a four-digit code from the list. If this is done correctly, the TV button will blink twice. If you enter an invalid code, the TV button will produce one long flash and the remote control will exit the program mode.
5. Aim the remote control at the TV and press the Power button. If you have the correct code, the TV will turn off. If not, repeat steps 2-6 with a different code.

If none of the codes work, you can try the code search procedure:

1. Turn on the TV.
2. Press and hold TV. Press and hold Setup until the TV button light blinks twice, then release Setup.
3. Press 9-9-1. The TV light will blink twice.
4. Aim the remote control at the TV. Slowly Press Power and TV alternately until the TV turns off. You may have to press numerous times until the remote control finds the right code in its library. Stop when the TV turns off.
   
5. When the TV turns off, press Setup once to lock in the code set. The TV light will blink twice.
   

Comcast Digital Transport Adapter (DTA)
Sylvania LCD TV codes:

Hello,
Its quit simple to code search using the comcast controller.
Hold the setup button untill it flashes
Press 9 9 1 ...wait a second...press 1again.
Next hit channel up on the remote untill the tv turns off and this may take some time. When the tv turns off press setup to save the settings and try to power the tv on with the comcast remote. If you find that the controller will work the volume and turn the tv off but will not turn the tv on you are on a slightly wrong code and you may need to code search again.

Hello, Twomufflers -

Doesn't Comcast provide you with a remote to use for the cable box?

We have AT&T Uverse as our cable provider and have an AT&T remote control for each of our cable boxes.

One of our TVs is a Vizio and we only use the Vizio remote control when we need to change something through the TV menu - like when we change from HDMI input (for cable programs) to AV input to watch a DVD.

10171 11271 11314 10054 10030 11963

Hi Attychase,

Comcast actually has several different remotes for their different set-top boxes and the remote codes aren't always the same. They list all of their current remote devices on the following page. If you click on view manual it will give you a list of remote codes.

http://www.comcast.com/corporate/customers/customer_support/remotes.html

Hope this helps.

Your Samsung is in "broadcast" mode.
On the remote, press the "source" button once... twice...until you get to the Comcast input.

I just programmed my comcast remote for my Samsung v1000, My comcast remote is very similar to the 3-in-1, but has a few more buttons on it (on the Comcast site, my remote looks like the DVR 3 remote, but I don't have a DVR). The code I used was 21044.

By using this code, the play/stop/rewind/ff buttons all work. I didn't test the record button. The Info button worked as "Display" and Exit button to work as Audio Source (HiFi/Mono). However, the Volume and Channel controls did not work.

I hope this helps.

It's 10000

The answer depends whether its a Comcast DVR Remote or a regular one. The DVR codes are 4 digit -- the others are 5 digit. I got 0060 to work for my DVR remote.

I have a Sharp Aquos 46" and go a Comcast HD receiver as well, and had the same problem turning off the Closed Captioning. I order to turn it off you need to go into the box user setting by (starting w/ the cable box and tv on) pressing the power button for the cable box then the menu button for the cable box. This will open up the user settings menu. Just toggle CLOSED CAPTION to DISABLED.