What is the remote code of dsp 3300 philips multimedia speaker system?

Black one is the (--ve)

Is the buzzing sound like power line buzz or something else? Web search "buzzing audio cable" for ideas that match your symptom.

i want philips home theater model no dsp 5500 remote controller

i have purchased philips dvd and philips home theater 5.1 3300w model. how to connet to the home theater to dvd and tv. because i miss my home theater manual book.

Firstly make sure you have connected the speakers to the main system in an proper order. Certain system's have the name of the speaker's mentioned at every output line which is at the rear of the system. If you would connect the wrong wires then it eventually would not play the sound. once this is done make sure that the wires of each speakers are split into two at both the ends. They are normally coded in red and black colours at the tip of the wire. Check if the red of the wire is connected to the red of the system and so on for all the speakers. So try removing all your connections and do it all over in a proper way.

Connect the Aux cable to orange hole and the other side of the cable to your laptops Headphone cable.

Philips 0054
Magnavox 0020, 0024, 0028, 0030, 0036, 0054, 0096, 0186,0187, 0230, 0386
Here is a link to URC-3300 codes.
http://www.hifi-remote.com/ofaold/acc3cod.html

Depending on the location you're living, try to connect a good ground to your system might solve the problem

http://www.hifi-remote.com/manuals/ is for the manuals for one for all.

For most remotes check out this
http://www.remotecodelist.com/remotes/