Question about Invicta Diver Watches

1 Answer

My watch wont run

My watch is brand new. I have only wore it twice. It has stopped running and I do not know what is wrong with it. All of the other fuctions for button a and b work. But it wont keep time

Posted by dom_covarell on

Ad

1 Answer

Ravreet Kang

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 5 Answers

Sometimes when u buy a new watch they have it turned on for display try getting a new battery.

Posted on Jul 26, 2012

Ad

5 Related Answers

Anonymous

  • 3 Answers

SOURCE: the watch stops instead of the chrono

On this type of watch the second should not be working unless you are in the chrono mode. The lower dial should be the only indication of the seconds when not in chrono mode. You probably need to have the chrono reset and shown how the functions work. Try a Fossil location they will be able to tell you how to work this watch. It does not sound like this is a major problem.

Posted on Apr 06, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: I just bought my wife a michele csx-36 watch. Its brand

that happened to me too...the watch repair man told me that I had the stop watch on. The stop watch should serve as a stop watch, not the second hand. The second time on your watch is the small dial at the bottom middle of the face. Once I turned off the stop watch feature, my battery life is fine...I have not had to change my battery in over 2 years now. HOpe this helps.

Posted on Feb 28, 2010

escapement

Arturs Kalnins

  • 2338 Answers

SOURCE: keeping 2008 breitling cockpit watch running

You have to wind the watch till it is fully wound (significant resistance should be felt).
It doesn't matter how many times you wind it (1 or even 40) - what matters is the strength of the spring.
Do as follows:
At any time in the morning wind the watch up till you feel there is no more winding left (should be quite tough). Memorize the time you did it.
Leave the watch (or wear it) till it stops completely.
Count the hours your watch did work (from the time you wound it).
Now you know exact power reserve for your watch.
It is advised to wind the watch 2-3 hours before the power reserve is gone.

Rate me.
, please.

Posted on Apr 08, 2009

Anonymous

  • 1 Answer

SOURCE: I just recently purchased a brand new Casio G-Shock GW-002KA 2913

if there is a black screen and shows chg thats mean your battery level is to low ////// so you must charge as soon a possible,,,,,,

Posted on Oct 08, 2009

Anonymous

  • 5 Answers

SOURCE: how do i set time on unlisted watch

dear sir
there r three buttons in which there r combination of buttons. your stopwatch button may not set the time . the middle button may set the time for u

Posted on Apr 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My son gave me a Anne Kline watch a year ago but it has stopped running. I changed the battery twice but it still runs some and than stop. What do I need to do?


Watch might need a superior or best quality battery that hasn't been in stock for long...

Few modern watches need a new battery every year and most in my experience will last at least a couple of years so the watch is probably faulty and it is a shame you didn't return it while it was under warranty.
A decent jeweller/horologist should be able to check this and advise you.

Jan 23, 2017 | The Watches

1 Answer

Why does my Gucci watch quit running every few days?


You can start by fitting a new battery & monitor it &see what happens good luck

Aug 20, 2014 | Watches

1 Answer

I have a ladies Fossil watch #AM4168. The battery went bad on it and when I changed it out with a brand new battery and the second hand won't move. I took the battery out thinking I was sold a bad battery...


It is a common logic problem. The watch stopped working. You assumed it was the battery; hence your assumption was wrong. Therefore the obvious answer is that the watch broke and that a battery would not help unbreak it.

Oct 21, 2013 | Fossil Sport Collection watch #AM4168...

1 Answer

I recently bought an invicata 8926A. It looks great, but I'm having some trouble winding it. When I wind it by moving it round and round for a few seconds, it runs for a while. But when i rest my...


This is certainly not normal. I had an automatic watch and because I wore it daily, I was unaware that is need any special treatment.

Automatic watches usually run for 2-3 days before stopping (if fully wound) and thrive on being used. My automatic watch was unsatisfactory when I bought it (new but very cheap) and I had it cleaned and it gave years of excellent service after that- perhaps that is your problem. I suggest that you contact their service center for advice.


If your watch is new then you should register it on their web site (go to http://www.invictawatch.com/invicta/services) and send it to them for repair.

If it is out of warranty, then you will see a price list on the above page (this is very unusual!) which will give you an indication of what you may have to pay to get it fixed.

Apr 15, 2011 | Invicta Automatic Pro Diver 8926A Wrist...

2 Answers

Brand new technomarine watch chronograph csx wont work? do i need to dosomethin to start it??


Change battery. Watch can be brand new, but battery is fitted when watch left production line.

Nov 05, 2010 | TechnoMarine Cruise Watch

1 Answer

Womens tag aquaracer wk 1320- have had it for over 10yrs- has been water tested twice but hasnt worked in awhile. I put it away and wore another watch but now I want to fix it. What's involved in a...


An 'overhaul' as we say in watchmaking refers to completely disassembling your watch, repairing or replacing parts as necessary, cleaning the movement in a machine designed for cleaning watches, reassembly, regulating the timekeeping to the best of the watches ability, polishing or cleaning the case and band and possibly replacing the crystal if necessary. It varies slightly from brand, watchmaker, quartz or mechanical, pocket or wrist but generally this is what an overhaul refers to. It is a complete refurbishment of your watch.

Jul 07, 2010 | Tag Heuer 2000 Classic WK1311 wristwatch

1 Answer

My Rado Voyager automatic watch has stopped running. What could be wrong with it and how do I fix it? Thanks.


it is because eaitther u have not worn it for a long time 84 hours it could have stopped or (i know it is water and dust proff but that is when it is new and it will be only dust proff )u may a took it in the shower or dropped it in the water or u took ir of and kept it in the bathroom the watervapour will harm the watch there is no onther way it can stop if u dropped it it wont breck easy

Aug 13, 2008 | Rado Watches

1 Answer

Watch stops sometimes and then restarts


If it's new, then just take it back to where you got it. There is no way your warranty can run out in a week.

Oct 10, 2007 | Casio Edifice EF106D2AV Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

763 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invicta Watches Experts

Bruce Robin

Level 2 Expert

300 Answers

ray gallant

Level 3 Expert

71004 Answers

Kardoc

Level 3 Expert

6120 Answers

Are you an Invicta Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...