I have a farenheit tid-730. the problem is after a few minutes the image goes black and white. I shut it down for a while and turn it back on and I have color for a few seconds and back to black and white. this does not happen when watching tv. and when using the menu the screen has color. it only happens when watching movies. I changed from video 1 , 2 , 3 and same results. whaat could this be?
An expert who has achieved level 3 by getting 1000 points
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Posted on Jul 27, 2017
SOURCE: need electrical connection..or diagram
tid-730 no video en entradas av1 al av3 pero si sonido el radio si funciona y se ve las estaciones en el display help me please
Posted on Apr 14, 2010
43 views
Usually answered in minutes!
×