Mitsubishi WS-48311 No image, but audio

IF YOU DONT HAVE THE MANUAL, LOCATE THE MANUFACTURERS NAME AND FIND THEIR INFO ONLINE AND CONTACT THEM FOR THE CODES FOR YOUR MITSUBISHI

Try first unplugging power cord for one hour.

Here is a link to the owner manual for this model--keyboard lock release is on page 32---might want to down load a copy of the manual as it is free.

http://www.scribd.com/doc/35942919/Mitsubishi-Owners-Guide-TV-vs-50111-Vs-60111-WT-42311-WS-48311-WS-55311

SD TECH

No,need to diagnose.It a 100% convergence problems.Convergence problems very easy diagnose.The picture look like 3D,colors lines don't lines up.Fuzzy,out of focus.Convergence controls don't work to lines up any colors cross.The tech is cheating u if he said cost $125 to diagnose.If u know how to solders u could fix this convergence problems about $100.U can buy a convergence kit at Websites Tv repair World.com,Tvrepairkits.com.The shop everythings fix parts and labors only $300.

hello sorry but it sounds like the chip have gone again when you replace these chips you might have to change the resistors and the 2 capacitors as well

shaun

Hi, I seen your Post. I would like to buy parts off from you. How can I get in contact with you.

I have the same problem with my mistubishi projection tv model ws48311 I believe the problem I had before and it was a couple of transistors and a high voltage power supply that fixed it. I believe the problem was caused by faulty power from a power strip or outlet not making a good connection and sparking. I had Overland Tv in OP Ks look at the Television, but heard bad reviews from a coworker and now do not trust them [email protected]

There no longer available from mitsubishi, but the following link may have them or can get them. leave them an email with the model number of your set and what youre looking for.
http://servicemanuals.vstore.ca/

yes !! probably need to replace some parts in the POWER SUPPLY area, starting with the main fuse , or the whole POWER SUPPLY unit may need to be replace . hope this helps

menu has input selection to turn on/off or name video inputs.....T.