Question about Protron PLTV-32 Television

1 Answer

No picture when Turning on

When i start up my tv, the red light turns green, then red, then green again but the picture does absolutely nothing. If i leave it on in green mode for a while the TV will eventually turn on after a few minutes, but it shouldnt do that. Any ideas would be helpful.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

Your trouble syntom is very common.. the problem of your tv is due to lost contact soldered part...if your inclined with this job i suggest you to reheat the board....this will take time but this is the best solution gud luck!!

Posted on Mar 12, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and...


the green is the reboot process and is normal.
the red light is an error code indicator.
count the blinks of the red light...it cant be 30 times (I think)
it will blink a sequence, pause, then do it again for a total of three times.
count carefully, it gives you three chances to catch the number it is blinking.

Apr 13, 2011 | Sony Televison & Video

1 Answer

DO YOU FIX PS3s... I have tryed everything i can think of incloding different cables HD & normal,different TVs HD & normal Also holding down the power button and waiting for the beeps.But nothing...


  1. Make sure the HDMI cable is connected to the HDMI OUT port on the back of the PLAYSTATION 3 system. Connect the other end of the HDMI cable into the HDMI Input port of the TV or display monitor.
  2. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive power button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light --> green light --> then back to red light). This will ensure that you have held down the power button long enough to reset the Video Output Settings.
  3. Turn on the PLAYSTATION 3 system and once the system finishes powering up, the Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).

SAFE MODE

Have a look at this, it may help.

Jun 30, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

When i on the tv by remote the red standby light turns into green and i hear the tv sound but not picture and after a one or two second the green light turns into red. The tv goes into standby mode when i...


the high voltage or flyback transformer is not working.the sound runs off a separate fixed power supply.if you run your hand across the screen,is there static?that would mean the high voltage is ok but there is another circuit fault

Jul 08, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

No picture but have green light


  1. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings.
  2. Turn ON the PLAYSTATION 3 and once the system finishes powering up, the Video Output Settings will automatically be reset to the standard resolution (or detect the current display output settings of your TV/monitor).

May 24, 2009 | Video Game Consoles & Games

1 Answer

Picture wont come on screen


this problem is in the power supply.the red lights indicate as the standby mode.

Jan 23, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Screen Goes Black After About an Hour


Check the power board inside the TV, possible bad capacitors. I just had them replaced on mine.

Sep 21, 2008 | ViewSonic N3251w 32 in. LCD HDTV

3 Answers

Tv wont turn on


TV STARTS UP AND GOES BLANK SOUND NO PICTURE

May 16, 2008 | Philips 32PF5321 32 in. HD-Ready LCD...

1 Answer

No picture on TV with powerlight on


If you press the power button *on* your TV (rather than using the RC), does the power light still stay on red rather than turn green?

Jan 05, 2008 | Televison & Video

Not finding what you are looking for?
Protron PLTV-32 Television Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...