My watch keeps beeping!

Question edited for a little more clarity.

This is one of those watched with multiple dials and dozens of functions. It sounds like there is an hourly repeating alarm at 10 minutes to the hour. All time zones are synchronised to the top of the hour. The best thing to do is remove the batteries for 2 minutes and replace them. Then set the time again.

https://www.google.com/search?q=Casio+AE-1200whb-3bvdf+watch+manual

..

Hi Agne Suursaar,

Thank you for contacting fixya.
Do a clear cmos and then try reducing the number of ram sticks that you use to just one, and keep alternating ram sticks in different dimm slots. You may have one or more dead ram sticks/dimms.

it sounds like if the battery needs to be replaced. is it a new watch?

Hey, I had the same problem with my Coleman watch. It would alarm at midnight. I used the mode feature like the poster before me said. When I got to the alarm "screen" I used the button that backlights the watch's screen. The light came on and the alarm feature was removed. I hope this helps.

try holding down one or more of the buttons at once, you should hear a short beep indicating that the beep is off

Different PC manufacturers have different BIOS Boot codes.
Read first
http://pcsupport.about.com/od/nonworkingcomponent/ht/beepcodestb.htm
Then read:
http://www.pchell.com/hardware/beepcodes.shtml
http://www.computerhope.com/beep.htm
http://networking.ringofsaturn.com/PC/beep.php

Apple:
https://mediawiki.middlebury.edu/wiki/LIS/Apple_Computer_Beep_Codes
http://www.techbase.iofm.net/tips/applemac/tip1.htm
http://www.user-guides.co.uk/download/apple/applebeep/apple-beep-code.html

Try a different codec

SLDcodec.com is a good place to start

or you can goto you manufactor website to download the latest drivers.



I’m happy to help further over the phone at https://www.6ya.com/expert/david_92c86cbc79e9b552

Hold down the "Adjust" button (top left) for three seconds. It won't adjust unless you hold the button down.

Press "Mode" (bottom left) to change what you're adjusting, seconds, hour, minute.

Press the top right and bottom right buttons to adjust the number up and down.

Press "Adjust" again when you're done setting the watch.

To change date, alarm, alternate time, etc, press "Mode" to get to those functions before hitting "Adjust."

I hope that helps.

Do the systems beep when you try to turn them on?

Try turning on the system without a video card installed, it should give you a different set of beeps, if it does then you should be pretty certain the rest of the system is ok.

Put the video card back in and take out the RAM, you should get a different set of beeps.

Once you put the system back together you should at least get the POST screen on the monitor.