How do I delete "CL" on the base station?

Check the batteries, antenna and location of the base station in relationship to the sensors. Check each sensor's batteries and locations (not near large metal objects and high enough to send signals. Move the base station close to a window facing the remotes...

proceed with your instruc. manual section troubleshooting . or download from www.retrevo.com or www. manualsfactory.com
God bless you

Why does the base station keep blinking?

remove the power adapter and remove the battery from the handset. Now replace the battery and power the base unit , place the handset on the base and select intercom or search remote.
The base unit must automatically set the frequency to mesh with the handset and handshake to connect.

you can contact the service provider...........

YOU SHOULD HARD RESET THE UNIT

When restoring factory settings:
u Handsets are de-registered
- When resetting via the menu:
all Gigaset handsets
- When resetting using the key on the
base station: also all handsets of
other GAP capable devices
u Individual settings are reset
u All lists are deleted
u The system PIN is reset to the original
code 0000
u Eco Mode+ is deactivated
Only the date and time are retained.
Resetting the base station via the
menu
₪ Settings ₪ Base ₪ Base Reset
§Menu§
§OK§
Press the display key to confirm
SIEMENS Gigaset C380 User Giude Restoring The Base Station To The Factory...

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/25942GE3_IB.pdf

I have the same problem. Any ideas? My guess is that the outside temp sensor is defective.

http://telephones.att.com/telephones_ui/support/index.cfm

TRY "Contact us" for email or telephone help.

Where can I find a manual for Bellsouth 4300GR phone? Please help!