Question about Brother GX-6750 Typewriter

6 Answers

Margin Release for Brother GX-6750 Typewriter

How do you release the left margin in this typewriter?

Posted by on

  • 7 more comments 
  • Anonymous Dec 28, 2007

    I don't know how to release the margin for borther GX-6750.

    Can you please assist me, Thank you. Maria

  • tammykjo Jan 31, 2008

    How to release Right Margin?

  • Anonymous Feb 23, 2008

    can not set margins

  • Anonymous Jun 20, 2008

    CANNOT SET RIGHT MARGIN

  • Edna Mccall Jul 27, 2008

    My document that I use repeatedly is 11inches wide and the typing area is 9 inces wide. How do I set the margins so that I can have it that width. I now have to type half of one side then take it out and insert it again and type the other half.

    I have followed the instructions and it doesn't seem to work. I have asked other people as well and they can't do it following the instructions.

    Please help. Thanks

  • Edna Mccall Jul 28, 2008

    Thank you for advising on how to move the margins however, that is only half of it. Now what do I do to set the amrgins to where I would like to ahve them? Thanks

  • Anonymous Aug 28, 2008

    Brother ML 100

  • Anonymous Mar 13, 2014

    gx-8000 brother typewriter cover open

  • Anonymous Mar 29, 2014

    model GX-15

×

Ad

6 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

Typewriters have alimit to how far to the right or left that you can set margins. Once you use the alt & 6 key to bypass the current margin setting then move to the new setting then hold the alt key and touch the 7 key to keep it in the new position.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Posted on Aug 18, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold down the ALT key & the "6"...

Ok that help for a time but the probleme is not fix....

Cause whene you clik on the ENTER the margin come back to the normal like you never done nothing you have to repeate that like every time...

What wee need is..the tipping start at the beganing of the rool op to the end and when cliking on the enter it star at the same place like no margin at all...

Posted on Jun 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 25 Answers

Margin release. Press Return (for left position) or Tab key (for right position) in order to go left or right position in which your margin is set up. In order to margin release Press ALT and MREL together, then press again the Return or Tab key where your previous margin. Then you have to position a new margin and Press ALT and LMAR (for left margin) or RMAR (for right margin).

Posted on Feb 19, 2015

Thanks for the help!

Jill

Posted on Oct 17, 2007

Move the typing mechanism to the left margin. Hold down the ALT key & the "6" key. That should release your margins & allow you to reset them.

Posted on Mar 13, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replaced ribbon and it wont type no matter what I do

Posted on Sep 12, 2008

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I increase the margins on the typewriter


To set a margin beyond the left or right margin, move the carrier (or cursor) to that margin, press the Margin Release key, then proceed to move the carrier (or cursor) to the desired position. Then, press the Left or Right margin key to set the new margin. A beep will sound indicating the new margin has been set. When you set a new left or right margin, the previous margin is automatically cleared.

Alternatively, you can type beyond the right margin by pressing the Margin Release key and then continue typing when the carrier (or cursor) stops at the right margin. To type beyond the left margin, press the Margin Release key and then the Backspace key to move the carrier (or cursor) to the position where you want to start typing.

Remember to always use genuine Swintec ribbons and lift-off tapes for your Swintec 7040, which can be found at Swintec Typewriter Supplies .

Aug 19, 2014 | Swintec 7040 Typewriter

1 Answer

How do I release the right margin on the typewriter?


Look above the 3 key, you will see M REL that stands for Margin RELease. Move to the margin you want to change and wail holding the ALT key and press 3. Repossition the print head by using the BACKSPACE or SPACE BAR then again hold ALT as you select the new Left Margin or Right Margin (4=L MAR or 5=R MAR)

Nov 10, 2011 | Brother ML-300 Typewriter

1 Answer

How to type in Landscape form of paper .


Roll the paper in sideways. Use the Margin Release key to allow you to backspace to the left of your left margin, then touch the Left Margin key to set the margin at the new location. Go to the right margin and use the Margin Release key again to allow you to space past the right margin, then touch the Right Margin key to set the new margin there.
Type.

Aug 18, 2011 | Brother GX-6750 Typewriter

1 Answer

The margin release is not working on ML 100 typewriter


You must have the carrier at the exact margin in order to release it. To release the left margin, hit the RETURN key, then MODE with Mrel. For the right margin Depress TAB or SPACEBAR to get to the margin and then MODE and MREL keys. NOTE: Make sure the typewriter is not in L/L MODE.

Dec 23, 2009 | Brother Office Equipment & Supplies

1 Answer

Margin settings


You have to hold the magic margin button down while you move the carriage all the way to the left, then release the margin button. Then repeat for thr right margin. Hold the right magic margin button down while moving the carriage all the way to the right, then release the margin button.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Sep 05, 2009 | Office Equipment & Supplies

1 Answer

Swintec 640 margin release


If it is the left margin, you touch the carriage return button to find the current position of the left margin, then touch the mar release button and backspace to the new left margin location, then depress the left mar key. You should here a beep. You are done.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Jul 22, 2009 | Swintec 7040 Typewriter

2 Answers

Left and right margins of typewriter on Brother ML 500 Memory


Hi:

First find the margin release key and press it once. Then use the spacebar to move the carrier forward and reset the right margin. Or again use the margin release key by pressing it once and then press and hold the backspace key to move through where the left margin was and reset it at the point where you want it.

Andrew

Mar 19, 2009 | Brother ML-500 Typewriter

1 Answer

Resetting the margins on a manual typewriter.


I can't be for sure if these are auto set margins, but it sounds like they might be. If they are, first move the carriage as far to the right as you can. Hold the Left Margin Set (not Margin Release) lever as you move the carriage all the way to the left. Release the Margin Set Button or Lever. Now hold the Right Margin Set Button or Lever (not the Margin Release), and move the carriage all the way to the right while holding the Margin Set. Once the carriage is all the way to the right, release the Margin Set. Move the carriage to the place you want to set your left margin. Hit the Left Margin Set and then release. Move the carriage to where you want to set the right margin. Hit the Right Margin Set and release it. It gets confusing, but Margin Release does not set margins. Its sole purpose is only to bypass the margins. Hope this helps.

Feb 19, 2009 | Royal MS 25 Typewriter

2 Answers

SWINTEC 8014 S TYPEWRITER


Press "MAR RELEASE", one key right of "MAR LEFT" in the upper left hand corner.

Press back space in the upper right corner until it's where you want it and press "MAR LEFT" to set it.

Tab over to where you want the right margin and press "MAR RIGHT"

Aug 05, 2008 | Office Equipment & Supplies

3 Answers

Help with Typewriter


hold down the code key and press the margin release, to set margin, just hold code release margin, space over to where you want it and then press Margin set, left or right.

Jun 05, 2007 | Brother GX-6750 Typewriter

Not finding what you are looking for?
Brother GX-6750 Typewriter Logo

8,777 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Jim Keysor

Level 2 Expert

331 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...