I can't find what I did with the insert telling me how to reprogram my CK1851 for the new start date for Daylight Savings time. Anyone got it handy?
Thanks.
Thanks; my Adobe wasn't working and I couldn't open it. However, the last time I saw the manual, it didn't have the solution. I found this link on another site:
http://www.fox-international.com/emerson... and I know my clock is in Group 2. It took me a moment to figure out what to do because my button says Time/Date, it doesn't flash, and I had to set it while still holding the alarm one button, but once I did that, it immediately changed to the correct time.Thanks; my Adobe wasn't working and I couldn't open it. However, the last time I saw the manual, it didn't have the solution. I found this link on another site:
http://www.fox-international.com/emerson/
and I know my clock is in Group 2. It took me a moment to figure out what to do because my button says Time/Date, it doesn't flash, and I had to set it while still holding the alarm one button, but once I did that, it immediately changed to the correct time.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
From the Start menu, select Settings >
Control Panel > Date/Time to open the
Date/Time Properties control panel.
Use the arrows in the application to
navigate, increase or decrease the
time or date.
2. Select the year to open a field where
you can change the year by backspacing,
or entering a new year.
3. Select the month to open a pulldown
list of months.
4. Tap the checkbox to enable the Automatically
adjust clock for daylight savings
time, if desired
The daylight saving time change is calendar based, and unfortunately there is no way to reprogram it to the new schedule. You'll have to make the time changes manually.
There was a sheet of paper that came with my clock explaining how to adjust the daylight savings time settings, but I lost it. Anyone have theirs? All i know is it requires that you press an awkward combination of buttons simultaneously, but that's it.
Sorry it took so long to reply to you questions. The following web link will take you to the Emerson Customer Support web site for making the Changes for the New Daylight Saving standard. You will need a pdf reader and writer to read the web page and make a copy for your use. [http://www.emersonradio.com/owners/SmartSet%20Series/DST%20Information.pdf] Copy this web page link and paste it into the address bar of your web browser. If you are still having problems with making the setting for the new daylight saving standard you can call the Emerson customer support at this telephone number 1-800-909-1240. Call them between the hours of 8am and 4:30pm central time USA. Give them the make and model number of your Clock/Radio. Ask them for their assistance to help you make the correct settings for your Clock/Radio. I hope this information helps you, solve your problems with the setting of the Clock/Radio, to the new daylight savings standard. Thank you for using FixYa and have a nice day!
I have the same model, and I haven't found any sites that give a permanent solution. I did find a workaround for this model, which seems to fall in the "Group One" category on the following site. It is at least more of a one-touch solution (4x/yr) than manually moving the time forward/backward 4x/yr.
Hello everyone, I finally found a manual that I hope that it will help you as much as it helped me. It took long enough. Here goes; try this site: http://www.emersonradio.com/owners/SmartSet%20Series/
Thanks; my Adobe wasn't working and I couldn't open it. However, the last time I saw the manual, it didn't have the solution. I found this link on another site: http://www.fox-international.com/emerson...
and I know my clock is in Group 2. It took me a moment to figure out what to do because my button says Time/Date, it doesn't flash, and I had to set it while still holding the alarm one button, but once I did that, it immediately changed to the correct time.
×