Printer Not Working

hi, Mr Justin Becker
i think its a power supply problem, first you should try another dc adaptor, if your printer works fine with the new one, you have to replace it or take it for repair.
if it is a DC Adaptor problem it cost about: US $29.74

HP OfficeJet Pro 8500 AIO GSA printer power supply ac adapter cord...

If your Canon Printer not responding then this problem arises from the computer, Drivers, Ports, etc.Because if the computer is not able to communicate properly then the printer will not respond or if you are using the wrong port or drivers the same problem will occur. It's very frustrating that you can't print anything with your Canon printer because of this issue. So there are many steps which solve your problem.

There is an extremely high demand for a canon printer but many times printers get stuck while printing the document and you get some unwanted messages like Canon Printer Not Responding or Canon Printer Not Working. These are some common issue for the Cannon printer there are some various reasons for how to fix the canon printer not responding.

Our Service: If you have a printer problem after installing and switching to the new update of window 10, you will have simple troubleshooting issues and if Canon Printer Not Responding You should take professional advice by using Our Customer Service.

I hope this will help you to fix this annoying error.

":::::::::::::

I had same problem - just contacted Kodak live chat, they talked me through a couple of fixes which didn't work, so they ordered me a free replacement. The printer was 9 months old.

have you unplugged the printer and let it sit for 30 minutes? try that and plug it back into the power only!then check to make sure you have the right printer drivers for the printer. is this printer a refurbished printer? youll find a "refurbished" sticker on the bottom of the printer if it is. sometimes a refurbisher switches out the motherboard for another type. this means that the driver is also changed. if you have the right drivers then turn on the pc. turn on the printer. wait for the printer to finish making noises and plug in the USB cable. if this worked, youll hear windows little bing as it sees the printer. if those lights stay and the printer doesnt respond, buy a new one. the motherboard is bad in it!

Remove both ends of power supply cord and then reconnect them. Try another wall plug...try a wall plug instead of a power bar. If nothing works, and your printer uses a power adapter, perhaps the adapter has failed.

check you have nothing jamming the printer spool, i fixed one of these last week only to find that the person kept it on the floor and had dropped peanuts inside, once cleared obstructions printer working fine

reseat the toner cart

Many other machine users who use Canon's wireless printer for work-related or special printing work frequently find that their printer does not respond at any point in time. If you feel the Canon Printer Not Responding to issues on a regular basis, it is best to ask the aid of expert Canon Printer Repair Technicians or Complete Solution BLOG, as they will be able to solve the problem quickly. The key reason behind Canon Printer Not Answering Error is a lack of information between your PC and your printer. If this is the Canon Printer Not Responding Mac, there are a few steps below that could help you solve the problem.

Reasons that Makes [Canon Printer Not Responding]:-

>>The printer driver is configured with an improper port.

>>An incorrect access point was selected during the initial setup.

>>3rd party firewall or antivirus software is interfering with the printer software.

>>USB problem that refuses to establish contact under Windows (if a wired connection is used)

Complete Blog: Canon Printer Not Responding

Thanks for reading..!

Canon S330 Turn off printer
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Press Resume button 2 times then let BOTH buttons go.
Green lights will flash and then stop blinking.
When green lights are solid, press the Resume button 4 times.
Press the Power button and the printer should turn off, if not, press the Power button once more.
Your printer should respond as normal