Schematic circuit sub JAMO sw 2010 - Jamo SUB 200 Subwoofer

You will just need to re-pair it. That is assuming the new board fixed the issue.

https://www.fixya.com/support/r26362721-pairing_bluetooth_devices

and also

https://www.google.com/search?q=pair+a+wireless+Jamo+360+sub+to+sound+bar

..

Did you google it. Google, c80 sub woofer schematic, then look at images.

the easiest solution is to get yourself a cord that switches from headphone plug to RCA and connect it that way. I sure hope that this helps you in hooking your ipad up to the Jamo 200 Sub. Thanks, Cody

Check out this link:


http://2getdtv.com/directv/stereo_receiver_codes.html?phpMyAdmin=ed9585cdc5a4551847999cb4dbcce76a

try replace the blown fuse with ampere and check the sound if still ok.
some fuse got blown if the load current exceed. maybe high volume can cause the high current.
other cause by short circuit coming from the amplifier.

Refer to the applicable Jamo manual.

http://www.jamo.com/na-en/support/owners-manuals/

http://www.jamo.com/images/download/313.aspx

hi,
i have a jamo 250 sub.the blue light is working.when i connect the jack to the left line IN according to the manual it makes a sound as well.but seems not working.is it related to the fuse????i know the fuse box.but i dont know how to remove the fuse to check.pls help me out.my receiver is onkyo tx-sr 608

thank you

ron

Use the PRE-OUT SW (subwoofer) output and connect it to the left RCA socket of your subwoofer.

Sound like a component inside the sub is overheating. Most likely will need to be replaced.
Thanks,
Lee

Dual Voice-Coil
The unique Dual Voice-Coil design allows both left and right channel sound from just one speaker. Simply hook up both the left and the right channels to the special terminals on the speaker. Hook up one channel only, if the speaker is to be used in a conventional stereo set-up.
I found this on jamo site hope that will help you