Hi, have had no problems with my camera at all until recently when I take a black & white photo it all blurs as if the camera is moving, even if the camera is used on a solid still surface. Any ideas? Would love not to have to send it away! Thanks!
Yes, only when in black & white mode. This is true but do you know of any other solutions? It ruins the enjoyment of taking pictures and seeing the finish straight away - a huge pro for me of the digital camera.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: blurry black & white photos
Are you saying this problem *only* happens when you put the camera into black and white mode? If so, you could simply shoot everything in color, and then convert the images to black and white after transfering them to your computer. The free photo organizer from Preclick (www.preclick.com) will do this for you and more.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To remove the blur from photos, you need to be in a place where there is enough light to have a fast shutter speed. Using the camera indoors without the flash on will usually result in blurry photos.
Try using the flash.
Holding the camera with two hands or even better, on a tripod, will help too.
HI there blurry image came for 2 reason.
1. Lens not adjusting or focusing properly.
2. Sensor damage or your setting is on Macro / close up mode.
Just try this first and let me know. Set the camera as AUTO mode with flash and then take a day time photo. if that photo came blur then clean the sensor & lens external body and try again. If again the result same then you need to repair the lens settings. Thanks.
You have to know the MODE your camera is in. If you have it in the wrong mode you may not be able to take a photo in some conditions. You typically cannot take a photo of the moon on any auto setting the moon will be a white blob. The moon almost has to be taken manually.
Search for Lens Error. There are many was to fix Lens Errors
Turn on your flash! Even in good lighting, shoot with the flash on. This will make your exposure shorter, and there will be less opportunity for movement of the camera or the subject to blur the photo.
Did you use flash? Did you use tripod? Generally speaking night photos with non-DSLR digital camera, W55 is non-DSLR, will be blurry unless either flash is used or a tripod is used. The issue is the camera shutter is set for a long exposure in order to get enough light that it is impossible to hold the camera steady. The color problem you mentioned is most likely your white balance. Normal white balance is sunlight at night you white balance should be Auto, Incandescent or Neon
Blurness doesn't happens because of the number of the pixels in the cameras. Is the picture on the computer screen blur/the cameras screen or the lens hole?
I suggest you to set the camera on Automatic station (red camera on the wheel) in day light,try to stay still see how blur the photos are when you are not playing with the parameters. it it's still blurry it could be the pulley block next to the -eyepiece. roll it until it's not blur.
What you describe may be caused by several different faults. Do the pictures from the camera show the same blurry washed out look? It may be either the aperture is stuck wide open, or the shutter may be similarly stuck open. Can you describe the symptoms further?