Philips Universal Remote (PM4S)

I don't think you will get that to work, you have two units in one box

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

'Z11' doesn't seem to be the correct alpha numerical model number.

https://www.google.com/search?q=philips+z11+tv%2Fvcr+replacement+remote

Save Code list for future reference Refer to the setup ...

Philips https://www.p4c.philips.com > files > sru4000_17 PDF Save Code list for future reference Refer to the setup procedure below and look up the 3 digit code for your brand of TV, VCR, etc., from the list below.
2 pages
Missing: z11 ‎' Must include: z11

Philips 4 digit remote codes for Combo devices - eliztech.com

eliztech.com https://www.eliztech.com > remotes > philips-4digit-co...
Four digit code lists for HTIB and TV/VCR/DVD/DVR/SAT/CABLE Combos - Philips universal remote controls.
Missing: z11 ‎' Must include: z11

Philips Universal Remote Control Programming Instructions

directutor.com https://www.directutor.com > content > philips-sru210...
Program your audio and video devices with Philips Universal remote codes, simple steps for programming Philips universal remote...

Please don't type is all CAPS, it is considered SHOUTING and is harder to read. Thanks.

No one buys Universal Remotes, you buy a remote made for the device, a copy of the original.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Genuine PHILIPS NA725UD DVD VCR COMBO Remote ...

eBay https://www.ebay.com > itm
Genuine PHILIPS NA725UD DVD VCR COMBO Remote DVP3150V/37 ; Type: Remote Control ; Manufacturer Warranty: None ; Custom Bundle: No ; Color: Gray ; Model: Philips.
MPN: DVD740VR99 DVD74DVR, DVD740 DV...
Compatible Brand: For Philips
Compatible Model: DVP3150V/37 US$49.91 · ‎In stock

• 
  

  Genuine PHILIPS NA725UD DVD VCR COMBO ... - eBay

  https://www.ebay.com > itm
  Genuine PHILIPS NA725UD DVD VCR COMBO Remote Control DVP3150V/37 Tested OEM Grey ; Custom Bundle: No ; Color: Gray ; Model: Philips ; Compatible Model: DVP3150V/37.
  US$38.95 · ‎In stock
  
  No 5 digit codes
  
  https://codesforuniversalremotes.com/philips-dvd-player-remote-control-codes/
  
  

Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls

Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Hello
Universal remote codes for Sylvania TV with One for all URC - 3300 remote control are:
0054, 0030, 0171

Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press DVD/VCR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming

a DVD Combo device, you will be able to control channel

selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

Press and hold SET until the LED (red light) blinks twice,

then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,

the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY

Repeat steps 1 through 5 for each device you want to control.

For future reference,write down each working device
code in the following boxes
OK.

Hello
Universal remote code for Sylvania TV/VCR Combo is:
0227
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Made by Funai. Try Funai codes.

Try 1101, or 1011, or 1110.

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Here's how:

Turn on the electronic you will programming the code for.
Press and hold the CODE SEARCH button until the red indicator stays on, then release the COE SEARCH button.

Press and RELEASE the desired mode button (TV, VCR, etc.). The red indicator blinks quickly, then stays lit.

Enter the 3 digit code from the code tables.

With the device on, press CHANNEL UP on your remote. If the device responds, no further programming is required.

Panasonic DVD/VCR combo code: 345

Search google for remote code for your type of remote I found mine on first choice