Question about Logitech R-10 Computer Speakers

2 Answers

Logitech R-10 speakers

I have new Logitech R-10 speakers. They do work, I have tried them on a compact disc player and they are fine. I have switched power on and off, and they are also (tried and tested)plugged into the right slot on my tower. They did not come with any software or CD with which to install them, and my PC does not recognise them...seems to be looking for driver information or somehting anyway that I don't have. I have tried everything...help! many thansk - shining27

Posted by susan williamson on

  • 7 more comments 
  • Anonymous Jan 25, 2008

    just got new logitech R-10 speakers cant get pc to reconize them. Didnt get disc to download so any help would be great.please make it easy to follow as i am new to computers and need all the help i can get.Thanks

  • Anonymous Feb 25, 2008

    I have Logitech R-10 speakers. They did work, but after I formatted my computer it does not anymore. They did not come with any software or CD with which to install them, and my PC does not recognise them...seems to be looking for driver information or somehting anyway that I don't have. I have tried everything...help!

  • David williams Mar 09, 2008

    I recently installed windows XP and my sound doesnt work ** more i was using a program called soundman.exe but i can **t download it anywhere any ideas

  • Anonymous May 22, 2008

    I purchased these speakers and plugged them in to my computer - they worked for a couple of months then stopped working. I have since tried to reconnect them so that I could download Skype. Have gone into control panel, sound audio devices and my computer is not ready any device.

  • Anonymous Jul 02, 2008

    wont work

  • vacanoxx Nov 10, 2008

    i have a problem my pc don't recognise my (bocinas) i need the drivers or any information that needs my pc for wok. please help me...

  • flloyd Dec 06, 2008

    Logitech R-10 Computer Speakers

  • Anonymous Jan 19, 2009

    no sound seems to be playing from my speakers despite me downloading the drives

  • golbyjunior Apr 25, 2009

    my spekers do not work and are not even recognised by my computer i plugged them into my ipod and they work with that but not my pc

×

Ad

2 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

The R10 speakers are analog speaker drivers are not needed, you may need drivers for your sound card-- quick test plug a headset into the green port on the back of your computer. if there is sound coming thru then the sound card is fine and you need to make sure your connection are correct. if no sound, plug the headset into the front ports for headphones. if sound is coming thru there but not in back the sound card needs replacement the port is bad.

Posted on Jul 18, 2009

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Download the drivers from this link http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1790,contentid=13181 if you still have a problem try http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_alp.php?p_sid=-phnmYvi&p_lva=&p_li=&p_accessibility=0&p_page=1&p_cv=&p_pv=3.1711&p_prods=844%2C17%2C1711&p_cats=&p_hidden_prods=&prod_lvl1=844&prod_lvl2=17&prod_lvl3=1711&p_search_text=&p_new_search=1&p_search_type=answers.search_nl Hope this helps :)

Posted on Mar 07, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Any disc inserted just gets ejected

Either the loading is not completing of the mechanism or the laser pickup lens is dirty.
0helpful
1answer

I was attempting to install a new stereo in my 2000 taurus. it requires to an adapter to put the new stereo in. i got the new adapter and stereo in *kinda* but decided i didnt really know what i was...

check your fuses first. You may have blown one.


Visual Inspection Chart Mechanical Electrical
  • Integrated control panel (ICP) physically damaged, misaligned, any control(s) inoperative
  • Digital audio compact disc player physically damaged, misaligned, any control(s) inoperative
  • Antenna or antenna cable physically damaged, misaligned connection(s)
  • Radio speakers, mounting/speaker cones physically damaged, misaligned
  • Radio ignition interference capacitors, radio frequency interference suppression bond misaligned (also check for cleanliness and metal-to-metal contact)
  • Battery junction box (BJB) fuses F127 (5A), F117 (20A), F127 (5A).
  • Central junction box (CJB) fuse F227 (10A) F211 (15A), F216 (15A), F226 (10A) (wagon only)

  1. If the fault is not visually evident, proceed to diagnose the integrated control panel (ICP) by entering the ICP Self-Diagnostic Mode.
ICP Self-Diagnostic Mode
NOTE: To enter the ICP Self-Diagnostic Mode, the ICP must be ON and in radio tuner mode (AM/FM).
  1. Enter the diagnostic mode by pressing and holding preset buttons 3 and 6 simultaneously. This will suspend all radio functions, and display SP.
  1. Preset Button 1 = Audio internal/external SELF TEST. The display will flash SELF while gathering the diagnostic trouble codes (DTCs), then stop flashing when complete. Press the TUNE UP button to display the DTCs if any exist. Record codes and refer to the following table:


ICP SELF-TEST CODES Code Description 0 No diagnostic trouble codes logged 1 No response from rear chassis unit (RCU) 2 No response from cassette player 3 - 4 No response from compact disc player 5 - 6 - 7 No response from remote climate control 8 - 9 Read Only Memory Verification failed
  1. Preset Button 2 = Displays the feature strap for code identification, refer to the following table.


Code Description 01 Base-Electronic Search Radio (ESR) with Manual Climate Control (MCC) 07 Electronic Search Radio with Cassette (ESC) with MCC 17 ESC with Electronic Automatic Temperature Control (EATC) 97 Not programmed default of ESC with EATC
  1. Preset Button 3 = ICP and RCU identification. This test identifies the software level of the ICP and RCU. The ICP is tested first, followed by the RCU. The display will have two sequences of three codes each. The first sequence is for the ICP, the second sequence is for the RCU. For code identification, refer to the following table:
syh~us~en~file=a0017877.gif~gen~ref.gif

Item Part Number Description 1 - Product variant code 2 - Tape model 3 - CDR


SOFTWARE IDENTIFICATION CODES Product Type Code Description Product Variant Code Description 21 ICP 07
08
09
10
11
12 EATC with AM/FM, cassette player and CD changer
EATC with AM/FM and cassette player
Manual A/C with AM/FM and cassette player
Manual A/C with AM/FM
EATC with AM/FM and cassette player
EATC with AM/FM cassette player and CD changer 31 RCU 01
02
03 Analog
Digital
Midline 71 Remote climate control 01 LH drive 52 Compact disc/disc jockey 01
02
03
04 Sony® 10 disc
Sony® 6 disc
Clarion® 6 disc
FMS 6 disc
0helpful
1answer

Only 2 of my 5 speakers work o.o'

the input for the speakers need to be 5.1
i guess you might have connected to 2.1 audio source
if i am not wrong,you might have connected it to 2.1output of your PC
try connecting the same to an DVD or compact Disc players,which has 5.1output
11_2_2011_1_10_22_pm.jpg
0helpful
1answer

Logitech pure-fi Anywhere 2 Remote Control not working. Tried a new battery & still not working? any suggestions?

I received my anywhere one week ago, the remote didn't work, reracking several times didn't help, I replaced the battery with minus to plus vv. and then put it in again properly, working flawlessly since. Logitech won't advise this method but it's worth trying.
0helpful
1answer

The right speakers logitech Z 5500 do not work

try buying a new optical cable or change some settings on your tv.
1helpful
1answer

I have Logitech X-230 speakers. The left speaker

CHECK THE POWER SUPPLY TO THE SPEAKERS
REPLACE ITEM IF POWER TRANSMISSION IN NIL
0helpful
1answer

Naxa NX-670 DETACHABLE STEREO AM/FM.MPX CAR RADIO WITH COMPACT DISC PLAYER And AUX-IN JACK what is the wattage of this stereo

The manf claims hi power which usually means 50 X 4. More likely the actual power is more like 8 to 10 watts X 4.
1helpful
1answer

Turns off every two minutes

you just have to turn the volume up on the mp3 player and down on the speakers.
i guess they have a low noise automatic shut off or something so i turned the volume all the way up on my player and the problem was solved.
0helpful
1answer

DVD not recognised

the only solution is to change its firmware, NOT SO DIFFICULT. Or try buying a new one!! Patrick
Not finding what you are looking for?
Logitech R-10 Computer Speakers Logo

Related Topics:

2,417 views

Ask a Question

Usually answered in minutes!

Top Logitech Audio Players & Recorders Experts

Ekse

Level 3 Expert

13435 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Are you a Logitech Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...