Question about Refrigerators
I need the instruction manual so I can determine proper operating conditions
I was able to find two 18 bottle wine coolers on the Haier site.
The first is model number HVTM18DABB
The second is model number HVTSM18DABB
On either product page the manual can be downloaded from the "product support & downloads" tab
Have a great day!
Posted on Jul 19, 2012
That thing that's beeping...it is the circuit board. It is telling you that it wants a new cousin to live in your house. Replace it.
Posted on Dec 21, 2007
SOURCE: haier wine cooler
Thanks, I set the temp higher and I'm waiting to see if it actually goes up or keeps getting colder . I have notice that the red light that was lighted before is out and now the green light is on . Not sure what that means but usually green lights are better that Red !!!
Posted on Jul 07, 2008
For those of you who have problems with one or both or your zones not cooling on the HVTB18DABB or similar wine cooler/cellar, the problem lies the Peltier-style thermoelectric cooling module. The original part is "TEC1-12706" and information on it can be found on google. Finding this or a similar part on ebay can be done by searching for "thermoelectric cooler". If the exact TEC1-12706 part cannot be found, then any similar part that's 40mm x 40mm in size, and 51 to 69 watts should do fine. For $25 I was able to get 3 modules...one to replace the bad zone I had, and then I'll have 2 spares in case the other zone, or this new one, ever go bad again.
To replace the part you must remove the back panel from your Wine cellar. You will see 2 big fans attached to two large heat sinks. (If a heat sink on the back does not feel warm to the touch, the the other side is obviously not cooling, which means that zone is broken.) Remove the screws from the fan and the heat sink of the zone that is not cooling, and while holding the heat sink, pull the whole cooling assembly for that zone out. Dont be alarmed if you feel some insulating foam separating as you pull it out, its a tight fit so that is to be expected. Once you have the cooling assembly out of the fridge, take it apart and you will see the square ceramic cooling module inside. (REMEMBER which way the module was oriented before you remove it, so you know how to put the new one in.) Clip the red and black wires near the module and remove it from the assembly. DON'T wipe away any of the white thermal grease left behind on the heat sinks. If you have any extra thermal grease handy (available at Best Buy, or online at sites like newegg), apply an extra pea-sized dab to both sides of the new module. Put the assembly back together and splice the wires from the new module to the loose wires left behind going into the back of the Wine cellar. Mount everything back in place as before, close up the back, and youre done!
This is really a lot easier to do than it sounds, especially if you're comfortable doing this sort of thing...a few pictures would explain much better if anyone wants to illustrate.
These are actually great units, so I hope this helps somebody fix theirs!
Posted on Sep 24, 2008
HI. i couldn't find the FR23RD but, i have been told that this manual covers your model. It basically covers FR24SL threw FR24RD. Your model is also covered in this edition. Click to review your manual.
Please rate and god bless.
Posted on Mar 22, 2009
Tips for a great answer:
Oct 30, 2014 | Haier HVDW20ABB 20 Bottle Display Window...
Sep 26, 2014 | Magic Chef MCWC30MCG Compact Wine Cooler
Jun 30, 2014 | Koolatron KWD28SN 28 Bottle Compressor...
Dec 16, 2013 | Haier HVW18BSS Wine Cooler
Koldfront makes a great dual zone cooler. I found you one that holds 18 bottles with
space for 6 bottles of white wine and 12 bottles of red.
Jul 31, 2012 | Furniture
Apr 10, 2010 | Haier HVUE08A Wine Cooler
Sep 16, 2009 | Emerson (025806803716) Wine Cooler
Oct 18, 2020 | Refrigerators
861 people viewed this question
Usually answered in minutes!