I turn on the TV it stays on for a few minutes, then the screen goes black and a green horizontal line appears and
the screen goes blank again. However, the sound stays on.
What can I do to fix it?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unfortunately, TV sets are not equipped with adequate internal protection against electrical storm damage, and it doesn't matter that the TV was turned off if it was left plugged in to an active electrical receptacle and/or directly connected to an antenna or an Internet data line. The fact that you can still receive anything at all indicates that the TV set can probably be repaired at a service shop, but for future protection of the set you should purchase a good surge protection device such as the one found at the below link. Amazon com APC 11 Outlet Surge Protector 3020 Joules with Phone Network...
7 times mean no horizontal deflection. So check horizontal output an solder of it and associate parts.Often resistor and transfo driver of base of h. output.
no ....the tube will end up after 20 yrs in 10 yr old sony... it is worth if u fix it. randomly going black means...horizontal driver trans former is the problem..or any loose contact with the 110 volt supply to that transformer,,or any loose contact with line o/p transformer.. (horizontal driver transformer may be gone then tv behaves like this) if any other parts gone tv wont come back.... there may be a loose contact call a service pro..
Is good that you hit it and it reacts,very likely you have loose conections in different places but for the distorted picture you need to check the horizontal driver transformer and flyback after that is corrected you need to check the complete chassis for loose conections.Take your time.Good luck.
easy way to fix it my self
×