Question about GE WBSR3140DW Top Load Washer
Have no error codes on the motor it is a green light . i checked the fill switch by reseting water level to several different settings and each time it filled and drained but did not agitate . i did the lid reset still no change . i checked the lid switch from the plug to the motor and its good . with the AC on checked power going to the motor ,it was there but still no agitate . whats next
feel in the back of your outter tub towards the top and chances are you will find a hole ge's love doing this if it is not under warranty you can repair with some JB weld with out replacing the tub
Posted on Jan 08, 2009
This is the electronic washer. Unplug for two minutes, plugin then open and close lid 7 times. This will reset motor. Also make sure belt is not broken.
Posted on Jun 12, 2009
Please find the links bellow to diagnose your problem…since your problem to the washing machine can be caused due to various reasons.Please go through the article to have an in-depth knowledge to your query…
Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com
Posted on Jul 06, 2010
Tips for a great answer:
possible that the machine does not start off the cycle because there are errors
due to feedback from the inputs. For the program to start up the main program
controller must initiate the INLET/MOTOR/DRAIN
pump/ valve to open up and allow each function to be driven starting from
the flow of water into the drum as also the drain valve to open to exit the
water at the point of the program cycle. If this does not happen then the
voltage at the valve/motor/pump must be checked or the fault relates to no
voltage from the controller. This means
the controller is a suspect.
water flows though the inlet then the flow pressure should be good, if not the
inlet valve is bad or there is dirt in the filter. Also check the flow at the
inlet of the water line. Once the water comes into the system the WATER LEVEL
SENSOR - normally a pressure switch- must activate at the preset/chosen level
to give the signal to the program controller to switch on the motor. What is
most important for the motor to start functioning is that the door switch must
be ON when the door is shut or this will be an error for starting the motor for
rinse and wash.
pressure switch: Click on : http://www.youtube.com/watch?v=HZZ2bDMspj8
link to replace the inlet valve:
Feb 12, 2013 | Washing Machines
Jul 12, 2008 | Miele Touchtronic W1213 Front Load Washer
Oct 11, 2012 | Washing Machines
Sep 30, 2012 | Roper Washing Machines
Nov 16, 2011 | Hydro Quip Inc Pool & Spa
Aug 31, 2011 | GE Profile WPRE6150KWT Colossal Capacity...
Jun 18, 2011 | Washing Machines
Apr 30, 2011 | General Electric WCSR4170D Top Load Washer
Aug 31, 2009 | Washing Machines
Mar 21, 2009 | GE WCXR1070A
335 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: