Stand broken During my recent move, the stand broke at the base. Do I need to replace the entire stand or just the round base? Please advise. Thanks, Toni

You are going to have to replace the entire seat more than likely. Never seen one that you could replace those stand off's. Hope this helps!

Other than going to Thompson who is RCA/GE/Proscan you can Google the model number with base to see what is available.

If it is not practical to glue the base back together with metal-filled epoxy (e. g., J-B Weld), then consider whether you can adapt the hardware to a custom wood base. If you are not comfortable with your woodworking skills, any cabinet shop could probably make a base for you. Be sure to include space for the base weight in the bottom of the wood plate, and specify that it must be capable of supporting the set. (The entire weight of the set including the original stand is 50.7 pounds; subtract the weight of the stand to find the minimum support capacity.) If the vertical arm broke, it may be better to replace it with steel or aluminum channel or tubing.

If the original stand mount scheme is not amenable to a hardwood base, you can build a stand to use the wall mount holes in the back. Be sure to offset the base weight forward enough so the weight of the mounting bracket doesn't tend to tip the set backwards.

I generally go to Ebay when I need to replace a part or find 'hard to find' items. You can find monitor stands on ebay for a reasonable price. You just have to make sure that the stand will work with your emachines monitor. All you have to do is look at the back to see how the stand attaches to the monitor and look for the same mount type. Below is a link to an ebay listing for 15 inch monitor stands.

http://shop.ebay.com/i.html?_nkw=15+LCD+monitor+stands&_sacat=0&_odkw=emachines+E15+monitor&_osacat=0&_trksid=p3286.c0.m270.l1313


You can also contact ebay by chat by following this link and ask if they have stands available for your monitor. There are none listed on the emachines site, but that does not mean that they are not available. The link to the Emachines contact page is:

http://www.emachines.com/corporate/contacts.html

These are two suggestions for finding a replacement monitor base or stand. I hope that you will be able to located the proper stand from these resources.

If I can be of further assistance to you, please let me know.

Brian

yes i do know a place were you can find a stand you can look for your brand!

http://www.discount-merchant.com/VIORE-LCD-TV-STAND-LC32Y43A-p/50000059.htm

i bout one for my viore

Try www.yamaha24x7.com/yamahaoms/

If you broke one of the base stand screw you will need to do as follow:

Remove the remaining screws of the stand and try to remove the stand, if you cant you will need to remove the back cover of the TV and then you will be able to remove the stand, remove the broken screw and put it all back.

It is pretty easy but if you feel you cant do it let me know and I can give you a detailed step by step guide.

You can find a new stand/base assembly for this model at the following link (Please note: the screws used for the base assembly are not supplied, so you would have to reuse the old screws):

LG 42LC2D Replacement Part Stand / Base Assembly

The stand base part number is 310430814621 and is available for $71.58 from tritronicsinc.com

Dan

we need picture of it, if your not talking about the swivel base.