I need an installation guide for a General Electric Model JVM130K

Look for a label posted inside or (unfortunately) on the back or go to the GE website and input the unit and that should give you the information

According to the GE quick specs sheet, this is a 1000-watt oven, 1.6 cu. ft. capacity. You can also download the manual here if you need a copy.

On some of these old GE Spacemaker models, there are two long horizontal bolts at the top (R&L corners), accessed behind the upper grill. Remove the grill (four tiny screws), take out the two bolts (flat screw heads) that attach to the rear plate, and your microwave will come right down and out, providing you've removed the three mounting bolts on the top.

You can also download GE owner's manuals and installation instructions here.

You can find handy exploded views and order parts by model number here.

If you need simple do it yourself repair tips or a free estimate, let us know.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Your membrane keypad is wearing out.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

The keypad is part number WB27X10171 and you can get it here for $91.68 plus shipping.

If you would like to have us do this repair for you, we do that for $39.95 plus part costs nationwide.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Appliance Repaired: General Electric Microwave
Model: g
Age Of Appliance: 5 - 10 years

took a screw driver and pride off plastic on inside of door. be carfule not to break it. only one of two screws that go into handle were visable. had to drill a hole in metal braket to get at second screw. you can just bend the metal braket back inorder to use drill. bend it back when done. took off handle and replaced it. snapped plastic piece I took off back in place and finished.
ge told me i needed to replace whole door. which they nolonger stock and I could not find a whole door for my model on web. found handlw on this website and did it my self

You should be able to find your owner's / installation manual here.

That will tell you.

OR you can contact GE customer service here.

They should even be able to recommend a compatible model or maybe even a "drop-in" replacement.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

sounds like you have a bad control board.. part# WB27X801 this is located behind the touch pad..