Error code C-2152 on C351 Bizhub All in One printer

reboot the machine while holding utility counter for a trouble reset

Cyan image unit need to be replaced using third party if so replace with OEM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta Bizhub 600 Malfunction Detected C-2807.

In my experience you have to change the developer and the machine will be ok.Also there is a chance that you have to clean the two toner sensor that are located in the end of the toner bottle,sometimes there is the problem.please let me know.

you must get a 2 line fax card

• The 1st Image Transfer Retraction Position Sensor
is not activated (retracted position) within 5
sec. after the 1st Image Transfer Pressure/
Retraction Motor has started turning during a
sequence of the Transfer Belt's retracting motion.
• The 1st Image Transfer Retraction Position Sensor
is not deactivated (pressed position) within 1
sec. after the 1st Image Transfer Pressure/
Retraction Motor has started turning during a
sequence of the Transfer Belt's pressing motion.

you need the retract motor or the sencor that sees it

the finisher has a shift motor malfunction. clear code by open and close door (do not turn off, it will not work) then look in finisher and see if there is a part broken or if there is a jam or paper clip in it... get ahold of me if you want more suggestions

Trans belt retraction failure. Its a common error that can be reset by opening and closing the front door with the machine on.
Look in the trouble history and if has happened often, better order a new belt.

good to
Imax Konica Minolta C451 Bizhub
I have a problem is the cod C2151 what to do Thanks

what model bizhub you have, 350 B/W or some other? cant find this code for this machine. sorry