I have a kirby sentura (recently bought) and I can't figure out how to get the regular sweeper attachment back on!!!!!!!!!!!!

Here is a walk through on installing the attachment hose, just reverse to remove the hose:
Vacuuming Bare Floor with Kirby vacuum

800-775-6586
GoodVac com

fault will be cable not power switch, phone your local kirby enginere for fixing

On this page

http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm

there is a video at the bottom on changing belts on a Kirby

Greetings,

If you click the link below it will take you to a video demonstration that explains step by step what you need to do to convert your Kirby into a carpet shampooer. The Vacuum in the video is the Kirby Sentria, but the procedure is the EXACT same as it is on your Kirby G3, as well as Kirby Diamond Edition, G4, G5, G6, etc. All Generation models have the same process of converting the vacuum into a carpet shampooer.

Instructional Video On How To Attach The Kirby Generation 3 Series Carpet Shampoo Attachment:
http://kirbywhq.powweb.com/videos/Carpet_Shampoo.mov

I hope that this video was helpful to you. Please feel free to request a clarification if you have any further questions about the installation, I'm always more then happy to answer any question, seriously.

If you did find this video helpful, please kindly rate my soltuion as Helpful by clicking the Thumbs Up Icon at the the bottom right hand corner of this page.

Thanks for watching!

Chris

you can turn your Kirby into a handheld by removing the handle (button down on the bottom) if it came with all the attachments. Take the big handle off attach the small one onto it and you can take it and clean your couches, bed, stairs, etc. had mine for twelve years never had a problem with it.

Shampooer manual here
http://www.goodvac.com/Articles.asp?ID=153

Good Luck,
Rocky
:-)

The zippbrush and shampoer are two different attachments. The Zippbrush is a small hand held device that is basically a rotating cleaning head that attaches to the hose. Connect it to the hose and the airflow starts turning the brush head, when it's running you'll hear a "zipping" sound.

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039
the above link shows you how to change the belt on the g-series kirbys but it will apply to the heritage edition as well...the only difference is the color...some of the arrows may be missing on the front belt lifter knob...but they are little differences...

hope this helps!!!

Here's my online guide for using the Kirby shampooer....

 

http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ10000000004594992

 

HOPE IT HELPS!!

Marci

 

Please follw this link to view my carpet shampooing guide. Hope it is helpful!! :0)

Marci

 

http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ10000000004594992