Unlock region code from th-s11 - JVC TH-S11 Theater System

change sim.othways contact service center

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__ytfdr5

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1

Best Regards, Jay__5t6y

I found the codes:
They all start with T
The rest is EG and another T16

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__sde467

Hello, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_gf56g

jvc g30 reads locked now whenever i try to open it to play a dvd

Hi,

To my knowledge, due to firmware design, most JVC region locked DVD players can not be unlocked with entry codes through the remote. While some JVC models could be unlock with a firmware update or a PC interface neither of which is available for a TH-P3.

Im sorry but thats just it for this model.

Alternately, a long method is to convert/copy the DVD disc itself from any region to whatever region your JVC is locked into. There are freewares just for this purpose. An example is DVD SHRINK 3.2.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

1)Power on with no disc.
2) press et up.
3) Go to lock symbol (do not select).
4) Press zero - 0 seven times.
5) Shows open for all zones on screen.

Worked for me in South Africa hope it works in th UK

Multizone code for Teac PL-D3200
Here is the procedure to unlock your Teac PL-D3200 to play all zones of DVD's.
Using your remote control:
1. Switch power on 2. Open the dvd tray (leave it open with no dvd in it) 3. Press "stop" 4. Press "734466" 5. Use cursor to scroll up or down until it says "Region 0" 6. Press "OK/Enter" 7. Switch power off 8. Switch power on
It will now play all region DVD's! :-)