Ilo TV, universal remote

3, 4, and 5 digit codes. Better to buy a copy remote for the Seiki make and model.

Remote Control Codes For SEIKI TVs

https://codesforuniversalremotes.com > remote-control-...
Looking for SEIKI TV remote codes? I'm trying to set up my cable/satellite/universal remote to work with my SEIKI television. What is the manufacturer's ...

SEIKI TV's Universal Remote Codes & Program Instructions

https://universalremote.codes > seiki-tvs
Jan. 22, 2021 - SEIKI TV 5 Digit Universal Remote Codes List. 12964, 13559, 13560, 10178, 13953, 11864 · SEIKI TV 4 Digit Universal Remote Codes List. 4635, 3953 ...

wharfdale TVs are rebadged by Argos, so I am unsure of the actual manufacturer, and therefore the control signal scheme that they use.
It might help if you gave the model number of the particular TV, as they could be using several different manufacturers in their range of televisions.
it is unlikely there will be a single code that covers the whole range of Wharfdale Tvs

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites http://electro-medical.blogspot.com/ . It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

0271,0277.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

To program the remote, press and hold the TV button. Then enter the 2 digit code from the code list. The EUR7724KC0 will only control TVs from about 17 manufacturers that were manufactured before the remote was programmed. If the given code for the TV brand doesn't work or the manufacturer isn't listed, then the remote can't control that TV. I'll list a few of the codes (see the manual, link below, for more):
Panasonic 01, 02
RCA 03
Samsung 14

The EUR7724KC0 remote came with several devices including the PV-D4734S DVD/VCR. The directions for programming the TV code are on page 28 of that manual. The code list is on page 29. This manual is available from Panasonic here: http://service.us.panasonic.com/OPERMANPDF/PVD4734S.pdf . Since this particular DVD/VCR model was listed at Amazon in 2004, it probably won't work for TVs built in that year or later.

I hope this helps.

Cindy Wells

Try
http://www.remotes.com/

Thanks
Frank
Live-Tech
1-888-361-8511
http://www.mylive-tech.com.

I can help you with your URC-3021 Universal Remote Control issues.

I do not see a listing for Ilo TVs in the Urc-3021 Code List.

But don't give up; many manufacturer's re-use other's control codes.
Therefore, I recommend using the One For All URC-3021 Code Search, feature to find the compatible codes to control your device.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

I think the Direct TV remote has a scan feature where it'll go through all the TV codes 1 at a time. Then if you see the TV go off, you stop the scan cycle and store it. Read the manual on how to do that. If it never turns off, then it's not compatible.

Geno

I had the same problem trying to program my satellite remote to work with the ILO tv. I found that the emerson codes DO work. Yes local cable remotes will work as long as you have the code and the brand is getting more popular. The code that worked with both cable companys, Charter and DirecTv was 10171 I believe. You can find it under the Emerson codes. Hope this was helpful.

Chkydakid: Have you found a solution for your remote code listing? I have the same problem and I contacted ILO, with the phone number provided on the set-up slip, that was loose in the same package as the remote and batteries, and they, or he, did not have an answer? I cannot find a website for them and have been unable to extrabulate the frequency of the remote, as I do not have an oscilliscope. I'm sitting here with 4 remotes, cable box, surround sound box, tv remote, and a VCR remote, this is ridiculous. Let me know please if you have found a solution [email protected]