My pure ion air cleaner turns on for 15 sec. and then turns off. I cleaned both filters and removed any exposed dust.

[PDF]Pure-Ion® Pro - Brookstone

www.brookstone.com/webassets/pdf/630285p_manual.pdf
BrookstonePure-Ion® Pro. Air .... Use this unit only for its intended use as described in thismanual . 4 . .... Position the unit so the cleaner air flows to your desired location .

If you go to this website, you will see that this model has a washable filter: http://www.brookstone.com/sl/product/65099-pure-ion-pro-air-cleaner.html
If you still have the literature that came with the purifier, contact their support number if your unit has a charcoal filter.

how to remove and clean filters for the Pureion UV air purifier?

Go to link below to see how to remove the filter.

http://www.brookstone.com/pure-ion-advanced-cleaner.html?his=2%7E46337%7E2%7Eroot_category%40kwd%7E561274p&searchRedirect=true

I have Bridge Stone Ionic Air Cleaner and I cant figure out how to take it a part to clean the filter. It's a few years old, used very little and I don't have a manual. Can anyone help. thanks

My ionair cleaner doesn't clean the air what so ever. All four filters are perfectly clean after running for over two months. All of them are properly inserted and seated as specified. No filter warnings turn on and the unit works in all other ways. There is an ongoing fire in the hills nearby and our house if full of hazy smoke.

I cleaned the filters as well earlier and the red filter light still blincked to clean the filters. Then I pushed the power button for about 10 seconds continously and then turned it on and the light turned off.

You need to reset it, unplug the unit and take out both filters. Then, plug it back and and simultaneously and firmly slam both filters into the back of it at the same time. Before putting both filters back inside the until, also vacuum out the insides in case there is hair/dust inside of it that has accumulated.
Also, make sure your filters are 100% dry before every putting them back inside the unit.
Good luck!

Send me an email at [email protected]

the clean filter light will reset itself once the filter is completely clean. Try dust off the areas where the filter is inserted into as well.