I lose my Bluetooth connection, and the problem is with the phone

Hi,
Turn your H350 on by pressing and holding the black "Talk" button on the side of your headset. Hold it until the blue status starts to flash. To turn the H350 off, simply hold the talk button until the headset turns off.

Pair your headset with your cell phone by entering into your cell phone's bluetooth menu--Menu > Settings > Connection > Bluetooth Link > Setup (see Resources below).

Put your Motorola H350 into pairing mode by holding the "Talk" with the device turned off. Hold the button until the status light on the side of your headset begins to flash, and turns back into a solid blue.

Back in your phone's bluetooth menu, choose the option to "Search/Discover" bluetooth devices. And when your phone recognizes your H350, select the headset and enter "0000" as the passcode.


Thank You

on your phone open your bluthooth section and(1) turn on bluetooth. then in the bluetooth options, (2)have your phone ready to search / find devices. (3)on the h350 press and hold the power button for about 5 seconds until the blue light comes on and stays on. it is now in paring mode. (4)tell ur phone to search for devices. your phone should find it. (5)then select the h350 on your phones found devices list. they will now pair. its possible a password will be requested, i believe the factory default password for the h350 is 1234. your phone password may be the same as your phone unlock code or your voicemail code.
time is limited you may have to do this a couple of times before they actually pair together.

I got home last night and there is e-mail from Motorola Tech. Support answering my same question.
I am very happy because the solution is very simple I can do by myself.
It said: remove the battery for view second and put it back,.............. wunderbar it works and Motoblue is together again for long time hopefully.

Regards,
Motoblue

first switch on ur mobiles bluetooth........... then switch on ur moto: H350...... then automatically ask to pair with the headset.......... accept it.............. then enter passcode 0000........... then it wil got paired........then answer yes to the next question ......... got it!!!!!!!!!!!!

After pairing goto optins and connect with the BTHEADset.

You do not have to unpair it from the other phone, the headset can be paired with many devices, but can only be connected to one device at a time. A safe bet would be to turn bluetooth off on your old phone.

Here is the User Manual for your h350 bluetooth, and pairing instructions are included. Enjoy!

User Manual

First when ya call connects, hit the Menu key (three lines inthe center) choose USE HANDSET.
Second Make sure the Bluetooth is fully charged, andit seems to lose charge fast.

need new passkey for got mine

Not being cheeky buddy but I have the same pairing are you tapping in "0000". Also go into settings and headphone or carsettings and set to auto answer. Hope this helps M8

you hold the button with the boom closed and as soon as the light stops blinking you realease the button and open the boom, the light should remain on and steady. promt your cell phone to find it and the code is 0000