How do i connect i850 cannon printer to my pc?

This is the direct download link for Canon i850 Inkjet Photo Printer compatible with Windows 7 (Click Here), open the link, scroll down to the bottom and click "I Agree - Begin Download", save it and install it. Your printer should run without any problem. Unfortunately, there's no additional software to be installed on Windows 7 for this Model.

If you have problem, let me know.

Good Luck.

Thanks for using FixYa.

Please change the colour cartridge

You can download the driver for the i850 at
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=331&modelid=8047
Please rate this soluion. Thanks.

Hi

I looked at the specs of you printer and it does not support ethernet/ wireless connectivity your best bet would be to connect your printer to your router with usb cable that's if your router supports it else you can buy what they call a wireless print server and connect wirelesly to your router or pc

If you meant that you wanted to print from your PC or laptop directly to your printer even if you are not on the internet, then yes, you can if you have the proper drivers to your printer and have the USB cable connected to both PR and printer.

Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter


If I could be of furtheme know. If this helps or solves the issue, please rate it.
Thanks, Joe




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

have you checked you are getting juice into your printer.... possibly you have a blown fuse, check cables as that may be your problem

Try cleaning the rollers with a cloth dampened with alcohol. You may have dust on them and the alcohol will remove any dirt or glaze.

my printer is jamed

thats tuff did cannon.com have it or mac website of not not made for u i know im sorry