Remote code for charter cable remote

Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762

SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control

Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4

Hello
Koss is not lited with IRC550 remote codes.

I have similar problem, solve it with codes from Koss brand.
Jsi and Koss are made by same lab.
Try Koss codes, it work for me.
good luck!!

get a refund. This fault is a can of worms mate. A road you do not want to go down

I have HTV with cable.I can not get this Dvd player to work with remote or with out.I hear the CD and Dvd spin but nothing else.What needs to be done?

I need the numbers for symphonic tv and memorex dvdplayer thank you

i need the code to program my koss player on the one for all replacement urc 4220 remote

URC-3220 One for All Big Easy 3 Universal Remote



I can help you to program your One For All Big Easy URC-3220 Universal Remote for your KOSS KS4110 DVD player, and to download the URC-3220 User Manual.



Please review my Fixya Tip posts for:

1. Searching for the proper URC-3220 codes, or
2. Downloading the URC-3220 users manual / owners guide. This contains all the codes for the brands of devices your remote can control.
   

I hope that helps.

0415 worked on mine

I had the same problem and it took an act of Congress to solve it. However, I can tell you that through much more hard work and time than it should have taken I discovered the infrared code for my "One-For-All" remote model URC-4021B00 is--0651. Not sure if it's the same for any other remote control models, but give it a shot.