Question about Panasonic TC-32LX50 32 in. HD-Ready LCD Television

My New LCD TV just turns off

I just purchased a Panasonic TC-32LX50. For some reason the TV just turned off without me turning off the switch or pressing the power button on my remote. When it happened the first time, I thought I must have sat on the remote and turned it on using the switch on the TV and it came up just fine. About 4 hours later, my husband called me in a panic telling me that it turned off without any warning. When I tried to turn it on again, the power button just vaguely flickered red and the TV screen stayed dark. It didn't hold a steady red, nor did it turn green. It seemed as though it wasn't getting enough power. We tried unplugging it from the power strip and plugging it directly into the wall. This did not help the problem at all. I called Panasonic and they told me to bring it to one of their authorized places to have it fixed. I have the 1 year warranty, but I would really like to know what's wrong with my TV. Any help would be great! Thanks!

1 Answer

Don

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
1,284 Answers

It is most likely a microprocessor issue or a power supply failure. It is easier to let them handle the repair since you have the warranty.

Posted on Mar 02, 2007

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Continuous blinking light on Panasonic Plasma

had the same problem wih my panasonic, it was a faulty power switch. make sure the power switch is sitting centrally in its housing, if not you may need a new switch

Jan 02, 2014 | Panasonic TC-P58V10 Plasma TV

1 Answer

Panasonic TC-32LX50 blinking red light

Could be an open internal fuse or power supply failure

Jul 31, 2017 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

1 Answer

What is the remote code for panasonic TC-L32C3 for the time warner control?

turn tv on
on remote
1. hit tv
2. hold down setup till it blinks twice(tv button light)
3.then press 991 wait till it blinks (tv button light)
4.press channel up slowly until tv turns off
5. once it turns off hit setup again
6. press the tv then power button and then see if tv turns on if not then you just missed the code(repeat)

Aug 28, 2011 | Panasonic TCL32C3 TV

1 Answer

1 dg board, (stv 5v sense time out). ........ive

To pettinabatem
I am having a shutdown problem with a Panasonic TC-32LX50. Initially when pressing the on switch, you see for 1 second a right half white screen (the left side of the screen remains black) and the TV turns off and the LED flashes 1 time. I did a T-Con cable check (based on the half white screen) and indeed this went away. Got backlight (full screen and no half white screen anymore). But still the TV shuts down after 1 second and the Red front LED flashes one time. Since this code is also illustrating a "dg board, (stv 5v sense time out)" problem in this unit, I was wondering if indeed you have encountered a defective DG board with yours. I am enclining towards a defective Power supply board.

Jun 27, 2011 | Panasonic Televison & Video

1 Answer

The HD-TV screen stays on for 4 seconds then it

Power Supply board is dead.Replaced the power supply board will solved this problems.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Mar 10, 2010 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

2 Answers

The cable guy programmed the cable remote to turn on/off the TV. We used it to turn the TV to stand-by. Then pushed the power button on the TV to turn the power off. Haven't been able to turn the TV on...

First use the original remote control that came with your tv, or just manually turn it on at the tv itself to bes sure it is working. If it works you should call the tech support for the cable company to program their remote control to a different code - or put it back to to factory state and just use two remotes.

Sep 12, 2009 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

1 Answer

LCD 32" panasonic tv

try the aspect button on the pana remote ( just below the volume)

Dec 31, 2007 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

1 Answer

SHUTS OFF BUY IT SELF AFTER A FEW SECS.

sounds like a internal switch fault, its very common. a tv repair man should be able to fix it.

Dec 15, 2007 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

1 Answer

No video

yea since the tv was replaced you can call the same technician and let him repair the tv the problem is in the video section or related circuit.good luck.

Apr 16, 2007 | Panasonic TC-32LX50 32 in. HD-Ready LCD...

1 Answer

Color seems inverted!!! please help!!!

CHECK OTHER TYPES OF VIDEO INPUTS. IF USING COMPONENT VIDIO CHECK YOUR CABLES ARE ALL MAKING GOOD CONNECTION, YOU CAN USE AN AUDIO CABLE TO CECK INDIVIDUAL COMP. VID. CABLES TO MAKE SURE THE CABLES ARE GOOD.

Oct 26, 2006 | Panasonic TC-32LX50 32 in. HD-Ready LCD...