My mitsubishi vs-8087's screen wont show picture at all

this TV will not tune modern cable signals. You must use a set-top box with a TV that is this old.

How to Replace Color wheel of Mitsubishi WD-60638 Please guide me
Thanks
Lodhi
[email protected]

I have the same TV and what is happing is the TV has 2 recievers in it to allow the PIP, So you have a power pack gone on 1 reciever the other is working, Your set has 2 power packs,1 for each receiver.
I had both of mine go, 150$ a piece to have fixed, good luck.

check the power supply section.. probably the electronic component got problem.

I've got a VS 8087, are you still interested in parts?

I have a vs 8087 good working condition

$700 you pick up Chicago area

[email protected]

Hello nicolastran,

I gave this advice to someone with this same problem so here it is again:

It sounds like your shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

Contacted Mitsubishi directly and found out that QV9 on the remote control resets to factory defaults, clearing the Parental lock out someone had put in place. The TV is in a Retirement Home and some of the folks are sneaky about wanting to control the TV in their own fashion. We will be watching the remote a bit closer now!

There are L and R audio outputs in the rear, so you can hook it up to a surround sound system; no optical outs.
The screen size is 80 inches - but I'm sure your friend told you that.

Convergence is usual cause of this problem. Try performing convergence adjustment with remote.